Lexmark Pro700 Series User Manual page 148

Error Message:
Unsupported Resolution
Unrecoverable Fax Error
Fax Modem Error
Phone Line is connected to
the incorrect jack on the
back of the machine.
Digital line detected
Failed to Connect
Phone Line Error
Phone Line Not Connected
Phone Line Busy
What it indicates:
The receiving fax machine does not
support the scan resolution of the
document that you are sending.
The fax modem encountered critical
errors.
The fax modem of the printer may be
busy, or the fax modem may have
encountered problems during
transmission.
The telephone cable is connected to
the wrong port on the back of the
printer.
The printer is connected to a digital
line.
The printer cannot detect a dial tone.
Your telephone line or the telephone
line of the receiving fax machine is
busy. This happens especially if the
printer is sharing the line with other
devices (telephone, answering
machine).
Troubleshooting
148
Possible solutions:
•
Lower the fax quality.
•
Enable Auto Fax Conversion.
Turn off the printer, turn it back on, and
then resend the fax.
Turn off the printer, turn it back on, and
then resend the fax.
Connect the phone cable to the
on the back of the printer.
The printer is an analog device and must
be connected to an analog line. To
connect the printer to a digital line, you
must use a digital line converter or a
filter.
For more information, see the "Setting
up the printer to fax" section.
See the "Fax troubleshooting checklist."
•
Set the printer to redial.
•
Increase the time between the
redial attempts.
•
Place a test call to the number to
which you want to send a fax to
make sure that it is working
correctly.
•
If the telephone line is being used
by another device, then wait until
the other device is finished before
sending the fax.
•
Schedule to resend the fax at a later
time.
•
Set the printer to scan before
dialing. The scanned document is
saved in the printer memory. The
printer can then retrieve it and
automatically redial the number.
port