Special Wireless Installation Instructions; Before You Begin - Lexmark Pro700 Series User Manual

4
Select My printer is already set up. I am installing it on a new computer.
5
Click Continue, and then follow the instructions on the computer screen for installing a configured printer on a new
computer.
Interpreting the colors of the Wi-Fi indicator light
The colors of the Wi-Fi indicator light show the network status of the printer.
•
Off means one of the following:
–
The printer is turned off or is powering up.
–
The printer is not connected to a wireless network and is in Power Saver mode. In Power Saver mode, the power
light pulses on and off.
– The printer is connected to an Ethernet network. Refer to the Quick Reference Guide to find out if your printer
has Ethernet capability.
• Solid orange means one of the following:
–
The printer has not yet been configured for a wireless network.
–
The printer is configured for an ad hoc connection, but it is not currently communicating with another ad hoc
device.
•
Blinking orange means one of the following:
– The printer is out of the range of the wireless access point (wireless router).
– The printer is trying to communicate with the wireless access point, but the wireless access point is turned off
or not working properly.
–
Either the configured printer or the wireless access point has been turned off and back on, and the printer is
trying to establish communications with the network.
–
The wireless settings of the printer may no longer be valid.
•
Green means that the printer is connected to a wireless network and is ready for use.

Special wireless installation instructions

The following instructions apply to customers outside of North America who are using a wireless broadband box. Some
examples of these boxes include LiveBox, AliceBox, N9UF Box, FreeBox, and Club Internet.

Before you begin

•
Make sure your box is wireless-enabled and activated to work on a wireless network. For more information about
configuring the box to work wirelessly, see the documentation that came with your box.
• Make sure your box is turned on and that your computer is on and connected to your wireless network.
Adding the printer to your wireless network
1
Set up your printer for wireless networking using the setup instructions provided.
Stop when you are prompted to select a network.
2
If there is an association/registration button on the back of your box, press it before selecting a network.
Note: After pressing the association/registration button, you have five minutes to complete the printer installation.
3
Return to the computer screen.
From the wireless networks list that appears, select your network, and then click Continue.
Networking
100