Thank you for purchasing a National Cycle Accessory. Before beginning installation please look over this guide and be sure
one possess the skills and workshop tools to properly complete the installation. Otherwise a motorcycle dealer would be
glad to complete the installation.
Dealers: If installing the windshield for a customer please give them this manual. It contains information needed to properly maintain
and use this product.
Attention:
Special notes and cautionary measures which can pre-
vent damage to the accessory or motorcycle.
PARTS INCLUDED
INDEX
DESCRIPTION
1
Hardcoated Polycarbonate VStream Windscreen
BAG#1069
2
37-370896-000
3
37-370897-000
4
51-516408-000
PREPARATION and REMOVAL OF PARTS
1. Position the motorcycle securely on its stand.
2. Remove the black covers. Figure 1
3. Remove the button head screws holding windscreen.
Screws will not be reused. (5mm Hex Key) Figure 2
4. Remove grommet. Grommet will be reused. Figure 2
National Cycle, Inc. Maywood, IL 60153-0158 USA 708-343-0400 / Fax: 708-343-0625
www.nationalcycle.com / email: info@nationalcycle.com
QTY.
1
Bracket, Tabbed Headlight
1
Washer, Spring
4
Screw, Button, M5 -.8 x 8
4
5mm Hex Key
10mm Box Wrench
3mm Hex Key
Installation and Owner's Manual
N20005 and N20006 VStream® Windshield
for Honda® VFR1200
Note:
Tips for facilitation of operation, control and
adjustment, as well as maintenance work.
2
3
4
Figure 1
Figure 2
Page 1 of 6
N20006
N20005
Grommet
10-118587-000 04/12