FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 3
10/100/1000Mbps connection to every attached client with no bandwidth congestion issue. The GSW-0507/GSW-0807 switch also supports auto MDI / MDI-X function. Each port could be used to connect to another switch or hub with no crossover RJ-45 cable.
If any of the above items are damaged or missing, please contact your dealer immediately. Installation The setup of the GSW-0507/GSW-0807 Switch can be performed using the following steps: 1. Install the Switch in a fairly cool and dry place. See Technical Specification for the acceptable operation temperature and humidity ranges.
Link/Act (1~5/1~8) Blinking The port is transmitting/receiving data. Rear Panel The rear panel of the GSW-0507/GSW-0807 switch consists of a DC power connector and 5/8 10/100/1000Mbps RJ45 Ports. The following figure shows the rear panel of the Switch. GSW-0507 GSW-0807 Power is on.
Page 6
Stations Connection Connect each station to the switch by twisted-pair cable. Plug one RJ-45 connector into a RJ-45 port of the switch, and plug the other RJ-45 connector into the station’s network adapter. Power on the switch and then system is ready.
Technical Support Thank you for selecting LevelOne products. LeveOne’s website contains the latest user documentation and soft-ware updates for LevelOne products. Please contact LevelOne Technical Support through our website. World Wide Web http://www.level1.com...