Installing Device Drivers; Installing The Driver For The 4-In-1 Media Card Reader; Installing The Driver For Usb 3.0 - Lenovo ThinkPad X220 4298 User Manual

23. When the System Settings Change window appears, click Yes. The computer restarts.
24. Install the Intel Chipset Support for Windows 2000/XP/Vista/7. To do this, refer to "Installing Intel
Chipset Support for Windows 2000/XP/Vista/7" on page 180.
25. Apply the PCMCIA Power Policy Registry Patch. To do this, go to C:\SWTOOLS\OSFIXES\PCMCIAPW\,
double-click install.bat, and then follow the instructions that appear on the screen.
26. Install device drivers. To do this, refer to "Installing drivers and software" on page 181.

Installing device drivers

To install device drivers, refer to the web site:
http://www.lenovo.com/support

Installing the driver for the 4-in-1 Media Card Reader

To use the 4-in-1 Media Card Reader, you need to download and install the Ricoh Multi Card Reader Driver
for Windows XP/Vista x86/x64. To download it, go to Lenovo Web site at:
http://www.lenovo.com/support/site.wss/document.do?sitestyle=lenovo&lndocid=tpad-matrix
Note: If you are installing Windows XP anew, be sure to install RICOH SD/MMC Bus Host
Adapter driver for Windows 2000/XP 77sp05ww first. To download it, visit Lenovo Web site
athttp://www.lenovo.com/support/site.wss/document.do?sitestyle=lenovo&lndocid=tpad-matrix, and then
install the driver.
To install the driver, do as follows:
1. Click Start ➙ All Programs ➙ Accessories ➙ Command Prompt. The DOS prompt window appears.
2. Type StandardInstall.bat at the DOS prompt. The Welcome to the Device Driver Installation Wizard for
the RICOH Media Driver opens.
3. Click Next. If the device driver is already installed, click No. Otherwise, follow the instructions on
the screen.

Installing the driver for USB 3.0

If your computer supports USB 3.0, and you have reinstalled the operating system, you need to download
and install the USB 3.0 driver to use the USB 3.0. Do the following:
For Windows 7 and Windows Vista
1. Access Lenovo Web site at
http://www.lenovo.com/support/site.wss/document.do?sitestyle=lenovo&lndocid=HOME-LENOVO
When you get to the site, find your model and display the driver links.
2. Select the USB 3.0 driver for 32-bit or 64-bit and extract it to your local hard disk.
3. Double-click Setup.exe in C:\DRIVERS\WIN\USB3.0\.
4. Click Next. If the device driver is already installed, click Cancel. Follow the instructions on the screen
until the installation is finished.
For Windows XP
1. Access Lenovo Web site at
http://www.lenovo.com/support/site.wss/document.do?sitestyle=lenovo&lndocid=HOME-LENOVO.
When you get to the site, find your model and display the driver links.
2. Select the USB 3.0 driver for 32-bit and extract it to your local hard disk.
3. Double-click Setup.exe in C:\DRIVERS\WIN\USB3.0\.
178
User Guide