Advertisement
Quick Links
Advertisement
Related Manuals for La Crosse Technology TX25U
Summary of Contents for La Crosse Technology TX25U
- Page 1 TX25U 915 MHz WIRELESS WEATHER STATION INSTRUCTION MANUAL...
-
Page 2: Quick Setup
Optional Probe w/ 10 Foot Wire ADDITIONAL EQUIPMENT (not included) 1. Two fresh AAA 1.5V alkaline batteries for the remote temperature sensor. 3. One, Philips screwdriver for mounting. QUICK SETUP Hint: Use good quality Alkaline Batteries; avoid rechargeable batteries. 1. Have the Wireless Weather Station and Temperature sensor 3 to 5 feet apart. 2. -
Page 3: Temperature Sensor
DETAILED SETUP GUIDE I. BATTERY INSTALLATION (When one Temperature sensor is being used) 1. First, insert the batteries to the Temperature sensor (see “A. Temperature sensor” below). 2. Within 2 minutes of powering up the sensor, insert the batteries to the Weather Station (see “B. - Page 4 A. SET-UP OF MULTIPLE SENSORS 1. Remove all the batteries from the receiver and sensor(s) and wait 60 seconds. During these 60 seconds, press any button 20 times to discharge any excess power. 2. Insert the batteries to the first sensor. 3.
-
Page 5: Maintenance And Care Instructions
4. Through the 3 screw holes of the bracket, mark the mounting surface with a pencil. 5. Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket. 6. Insert the remote temperature sensor into the bracket. Problem: No outdoor temperature is displayed. - Page 6 This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures.