Operation; Display And Operator Controls; Making A Measurement - La Crosse Technology InfraScan IR-101 Instruction Manual

Infrared thermometer
Hide thumbs Also See for InfraScan IR-101:
Table of Contents

Advertisement

Operation

1. Display and operator controls

All of the functions of the measuring unit are controlled and monitored using
the operating button (7) and the back lit display.
a.
Temperature display - currently measured value
b. Hold indicator
c.
Temperature display - minimum value
d. Temperature display - maximum value
e.
Battery symbol – low battery indicator
Temperature units – °F or °C
f.
g. Operating Button
h. Lens

2. Making a measurement

The object being measured should be a minimum of twice the size of the
infrared thermometer's lens. The ideal measuring distance is 3 to 12 inches,
which will yield a measurement area of ½ inch to 2 inches. As the infrared
thermometer is moved away from the object being measured the area being
measured increases (6:1 ratio).
The infrared thermometer is switched on by holding the operating button down
for 1.5 seconds or more. By continuously holding down the operating button
the measured value will be updated as long as the operating button is pressed.
Releasing the operating button will finish the measurement. The "Hold"
indication signals that measuring has stopped. The backlight will shut off 4
seconds after the operating button is released. The infrared thermometer will
automatically switch off 8 seconds after the last measurement. Holding down
the operating button again will clear the minimum and maximum memory and
begin a new measurement.
1
2
3
4
8
7
6
5
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents