Table of Contents
Advertisement
1.
Connect the provided travel adapter into the wall
power socket.
2.
Plug the other end (as shown below) into the
device's charger port.
WARNING: Fully insert the plug into the
device's charger port, otherwise it may not charge
your device.
Turning your device on and off
•
To turn on the device, press and hold the
Lock Key for a few seconds.
•
To turn off the device, press and hold the
Lock Key and touch OK to confirm.
Locking and unlocking the screen
When you do not use the device for a while, the
screen is turned off and locked automatically to
prevent unintended operation and save the battery
power. When you are not using your device, press the
Power/Lock Key
1.
You can turn on the screen by pressing the
Power/Lock Key. Your Lock Screen will appear.
2.
Touch and hold
screen around your finger.
3.
Drag your finger to the edge of the larger circle
that surrounds it. The screen is unlocked and
the last screen you were working on opens.
NOTE: If you have set up an Unlock Pattern, use
your fingertip to draw the pattern. If you set up a
PIN or Password, enter it and touch OK.
To adjust the delay before the screen turns off:
Settings
•
Power/
Power/
to lock your device.
. A circle appears on the
> Screen > Timeout
21
Advertisement
Table of Contents
