Additional Features; Sleep Mode; Setting The Time - LG LS-J07 Series Owner's Manual

Lg ls-j07: owners manual
Hide thumbs Also See for LS-J07 Series:
Table of Contents

Advertisement

Additional features

Sleep Mode

Press the Sleep Mode Auto button to set the
1
time you want the unit to turn off automatically.
The Timer is programmed in one-hour
2
increments by pressing the Sleep Mode Auto
button 1 to 7 times.
The sleep mode is available for 1 to 7 times. To
alter the time period in steps of 1 hour, press
the Sleep Mode Button while aiming at air
conditioner.
3
Make sure the Sleep Mode Auto LED lights up.

Setting the Time

Time can be set only when you have pressed
1
the Reset button. If you have just replaced the
batteries, the Reset button should be pressed
to reset the time.
Press the Start/Stop button.
Delay Start/Pre-Set Stop
Make sure the time is set correctly on the
1
remote control display.
Press the ON/OFF Timer
2
buttons to turn Timer on or off.
Press the Time Setting
3
buttons until the desired
time is set.
NOTE: Select one of the following four types of operation.
Delay OFF Timer
12
ON
OFF
Delay ON Timer
Delay OFF and ON Timer Delay ON and OFF Timer
To cancel the Sleep Mode, press the sleep
Mode Auto button several times until the star
(
) disappears from the operation display.
Note: The Sleep Mode will be operated at
slow fan speed (cooling) or medium fan
speed (heat pump only) for quiet sleeping.
IN COOLING MODE OR HEALTHY
DEHUMIDIFICATION MODE:
The temperature will automatically rise by 1°C
over the next 30 minutes and by 2°C in 1 hour
for comfortable sleeping.
Press the Time Setting buttons until the
2
desired time is set.
Press the Timer SET button.
3
Note: Check the indicator
for A.M. and P.M.
Press the selected on/off setting by
4
pressing the Timer SET button while
aiming the remote control at the signal
receptor.
To cancel the timer setting
Press the Timer Cancel button while
CANCEL
aiming remote control at the signal
receptor.
(The timer lamp on the air conditioner and
the display will go out.)
with the unit running
SET
SET

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents