Encryption Box - Kyocera KM-C850 Online Manual

5-4 Registering Box Information

(2) Encryption box

Perform the following procedure when you want to register or change the fax's Encryption box information.
1. Follow steps 1 through 6 under "5-1 Registering Self-Station Information" on page 5-2 and open the Address Editor for
FAX window. Then select the desired method of connection to the fax machine.
2. Point to the Box command under the Registration menu. The Box Registration window will appear.
3. Click on the Encryption tab in the Box Registration window. The Encryption Box list will appear.
4. Select from that list the number of the box that you want to register or edit.
5. Click on the Edit button. The Encryption Box dialogue box will appear.
6. Enter the following registration information.
1 Box No. field: Enter the number of the Encryption box. (4 digits)
2 Box ID field: Enter the box ID that corresponds to the Encryption box. (4 digits)
3 Encryption Code field: Enter the ID number that corresponds to the Encryption key to be used for Encryption
4 ... button: Lets you register Encryption keys. Refer to the procedure from the following step.
5 Print on RX checkbox: Put a check in this box if you want documents received during an Encryption Communication to
6 NW-FAX RX checkbox: Put a check in this box if you want that Encryption box to be used for Network FAX reception.
Transmission. (between 01 and 20)
be printed at the fax machine.
Page 5-30
1
2
3
4
5
6