Installing Kurzweil K2661 ROM Options
Thank you for buying a ROM option for your K2661. This document shows you how to install
either of the ROM options into your K2661.
Option Kits and Part Numbers
•
RMB3-26
•
RMB4-26
System Requirements
Operating System Requirements
K2661 OS v1. x supports both ROM options.
Install ALL of your Object Files
After you install your option, you'll need to reinstall the base objects (program files and such)
that correspond to your current OS, as well as the objects for all installed ROM options. You will
find the base objects file is on the SmartMedia card and CD-ROM that came with your K2661.
You can also get the appropriate object files from the www.kurzweilmusicsystems.com website.
Tools and Materials Required for Installation
•
#2 Phillips screwdriver
•
Two thick foam pads
•
The SmartMedia card or CD-ROM that was provided with your K2661. You can also
download the object files you need from the "downloads" area of our website:
•
If you're not sure which files you need, don't worry. There is a table at the end of this
document that lists the files you need for any installation. For tips about keeping track of the
files you need, see Organizing the Object Files on page 5.
Stereo Dynamic (SD) Piano ROM Option Card
Vintage EPs ROM Option Card
http://www.kurzweilmusicsystems.com/html/downloads.html
Part No. 910391, Rev. A