Quitting / Disconnection - Minolta Dimage A1 Instruction Manual

QUITTING / DISCONNECTION

When quitting the software, click the Quit button at the lower
right corner of the main window.
When disconnecting the USB cable, always quit the software
first. Then, turn the camera off and disconnect the USB cable.
Never disconnect the USB cable while DiMAGE Capture
shows the live image; it may damage the computer and the
camera. Always quit DiMAGE Capture first and turn the
camera off before disconnecting the USB cable.
Use of the AC Adapter is recommended for extended use.
Other notes
• Fast user switching may prevent DiMAGE Capture from operating properly.
• System standby will not work until DiMAGE Capture is closed.
• If the low-battery warning appears, DiMAGE Capture cannot be used. The computer and the cam-
era will disconnect automatically after transferring the data.
9