Clarity Walker W-1000 User Manual page 8

E
Walker Clarity comes assembled with
N
mounting bracket attached in desk
G
mount position. For wall mounting
L
simply remove bracket, rotate 180
I
and reattach as shown.
S
Desk
H
Mount
key
Wall
Mount
Key
To Install As a Wall Unit:
Important: A modular wall jack with
raised mounting pins is required for
installation as a Wall Unit.
Page 8
W1000_User_Guide
Installation
Continued
Back of
Phone
8
Wall
Mount
Bracket
• Attach the wall-mounting bracket to
the bottom of the Walker Clarity. It
snaps into place. The cord should run
underneath the wall mounting bracket.
• Plug one end of the telephone line
cord (long, flat) into the back of the
Walker Clarity.
• Plug the other end of the telephone
line cord into the wall jack with raised
mounting pins. You can store excess line
cord inside the wall mounting bracket.
Note: If the wall-mounting bracket is
already placed in the desk mount position,
remove it by pressing the tabs and turning
it 180 per the key shown for the wall-
mount.
11/15/99, 9:38 PM
W-1000