Cascade Dialing; Care - Clarity Walker W-1000 User Manual

Cascade Dialing

Your Walker Clarity will store up to 15
digits per memory location in tone
mode, and 16 digits in pulse mode. On
some occasions you may wish to
program a number that is longer than 15
digits, such as international calls.
Suppose you wanted to store:
011 44 0123 123 456
but you had to also dial 9 for an outside
line and pause to wait for a dial tone.
This is 17 digits and exceeds the
capacity of one memory location. You
can split the number up and save it in
two memory locations.
The Walker Clarity has been designed to
give you years of dependable service
with a minimum of care.
To ensure the utmost in
performance, follow
these guidelines in caring
for the unit:
W-1000
W1000_User_Guide
Programming
Continued

Care

19
For example, save 9 <pause> 011 44 in
memory 1 and 0123123456 in memory
To Dial the Number:
1. Lift the handset, listen for a dial tone.
2. Push memory 1 and then memory 2
immediately thereafter.
3. The Walker Clarity will automatically
dial the whole number.
4. Wait for the person you are calling to
answer.
You can cascade any number of memory
locations.
• Avoid dropping or knocking the unit.
• Dust the unit regularly. Wipe the unit
with a soft, damp cloth. Do not use
detergents and avoid excess moisture.
• The Walker Clarity is an electrical
device. Avoid electric shock by keeping
the phone away from water. (i.e.: bath-
room, kitchen sink, etc.)
11/15/99, 9:38 PM
E
N
G
L
I
S
H
Page 19