Clarity C320 User Manual page 24

FCC Part 68 Information
This equipment complies with Part 68 of
FCC Rules and the requirements adopted
by the ACTA. The FCC Part 68 Label is
located on the BASE UNIT of the tele-
phone. This label contains, among other
information, a product identifier in the
format US:AAAEQ##TXXXX. If requested,
this information must be provided to your
telephone company.
Connection to the network should be made
using standard modular telephone jacks,
USOC type RJ11C. The plug and/or jacks
used must comply with FCC Part 68 Rules
and requirements adopted by the ACTA. A
compliant telephone cord and modular plug
is provided with this pro-duct. It is designed
to be connected to a compatible modular
jack that is also compliant. See installation
instructions for details.
The REN is useful in determining the
quantity of devices that you may connect
to your telephone line and still allow these
devices to ring when your telephone num-
ber is called. Excessive RENS on a tele-
phone line may result in the devices not
ringing in response to an incoming call.
In most areas, but not all, the sum of the
RENs for all devices that you may connect
to your line should not exceed five (5.0).
To be certain of the number of devices that
you may connect to your line, you should
contact your local telephone company.
The REN for this product is part of the
product identifier that has the format
US: AAAEQ##TXXXX. The digits
24
FEDERAL COMMUNICATIONS
COMMISSIONS REQUIREMENTS
represented by ## are the REN without a
decimal point.
If this telephone equipment, the Clarity 320
telephone, causes harm to the telephone
network, the telephone company will notify
you in advance that temporary discontinu-
ance of service may be required. But, if
advance notice isn't practical, the telephone
company will notify the customer as soon as
possible. Also, you will be advised of your
right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make
changes in its facilities, equipment, opera-
tions or procedures that could affect the
proper functioning of your equipment if
they do, you will be notified in advance in
order for you to make the necessary modifi-
cations to maintain uninterrupted service.
If trouble is experienced with this unit, for
repair or warranty information, please con-
tact customer service at the phone number
listed in the Warranty section. If the equip-
ment is causing harm to the network, the
telephone company may request that you
disconnect the equipment until the problem
is resolved.
DO NOT DISASSEMBLE THIS
EQUIPMENT. It does not contain any user
serviceable components.
Connection to party lines is subject to
tariffs. Contact the state public utility com-
mission, public service commission or
corporation commission for information.
C320