Clarity C320 User Manual page 10

Corded telephone with answering machine featuring clarity power technology
Hide thumbs Also See for C320:
Table of Contents

Advertisement

Available languages

Available languages

• When wall mounting the telephone feed
the line cord into the angled groove on
the back of the telephone and plug into
wall jack.
• Hold the C320 so that the holes on the
mounting bracket line up with the raised
mounting pins on the modular wall jack.
Once the holes are lined up, push
the phone in towards the wall jack and
then slide the phone downward until it
is securely seated on the wall jack.
• Plug one end of the handset cord
(coiled) into the bottom of the handset.
• Plug the other end of the handset cord
into the jack located on the lower left
edge of the C320 telephone and hang
up receiver.
10
INSTALLATION
• When the phone is wall mounted the
handset knob will need to be reversed to
hold the handset in place. To reverse, pull
up on the knob and turn a quarter turn
clockwise. The knob will hold the handset
in place when you hang up.
• To convert phone from one mounting
position to the other simply depress the
tabs located above the feet on the mount-
ing plate and lift bracket off base of the
phone. Follow the instructions above for
positioning the bracket.
Avoid placing the unit where it will be
exposed to excessive heat or humidity.
C320

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents