Adjusting The Tone; Adjusting The Balance - Clarion XDZ616w Owner's Manual

When you have entered a title in a CD, it ap-
pears in the sub display. If you have not en-
tered a title, "NO-TITLE" appears in the title
display instead. For information on how to en-
ter a title, refer to the subsection "Entering
titles" in the "Other Handy Functions".
Setting the Beat EQ
This unit comes with 3 types of sound tone effects
stored in memory. Select the one you prefer.
The factory default setting is "OFF".
Each time you press BEQ button 7, the tone
effect changes in the following order:
"1 BASS BOOST" "2 IMPACT"
"USER CUSTOM"
"1 BASS BOOST" ...
• 1 BASS BOOST : bass emphasized
• 2 IMPACT : treble emphasized
• 3 EXCITE : bass and treble emphasized
• USER CUSTOM
• TONE BYPASS

Adjusting the tone

Press A-M button @ and select the item to ad-
just. Each time you press A-M button @, the item
changes in the following order:
When "1 BASS BOOST" is set
"BASS BOOST"
"ST NO TITLE"
When "2 IMPACT" is set
"HIGHT BOOST"
"FADER" "ST NO TITLE"
When "3 EXCITE" is set
"IMPACT" "BALANCE"
"ST NO TITLE"
When "USER CUSTOM" is set
"BASS<GAIN>"
<GAIN>" "BALANCE"
NO TITLE"
When "TONE BYPASS" is set
"BALANCE" "FADER"
Adjusting the bass
1. Press A-M button @ and select "BASS
<GAIN>".
2. Turning the Rotary knob $ clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
The factory default setting is "0". (Adjustment
"3 EXCITE"
"TONE BYPASS"
"BALANCE" "FADER"
"BALANCE"
"FADER"
"MID<GAIN>" "TREB
"FADER" "ST
"ST NO TITLE"
range: –6 to +8)
3. When the adjustment is complete, press A-M
button @ several times until the function mode
is reached.
Adjusting the MID
1. Press A-M button @ and select "MID<GAIN>"
2. Turning the Rotary Knob $ clockwise empha-
sizes the MID; turning it counterclockwise at-
tenuates the MID.
The factory default setting is "0" (Adjustment
range: -6 to +6).
3. When the adjustment is complete, press A-M
button @ several times until function mode is
reached.
Adjusting the treble
1. Press A-M button @ and select "TREB
<GAIN>".
2. Turning the Rotary knob $ clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
The factory default setting is "0". (Adjustment
range: –6 to +6)
3. When the adjustment is complete, press A-M
button @ several times until the function mode
is reached.

Adjusting the balance

1. Press A-M button @ and select "BAL".
2. Turning the Rotary knob $ clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
The factory default setting is "0". (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press A-M
button @ several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button @ and select "FAD".
2. Turning the Rotary knob $ clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
The factory default setting is "0". (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press A-M
button @ several times until the function mode
is reached.
Basic Operations
11
XDZ616