chARgE yoUR hEAdSET
make sure that your Jabra bT3030 headset is fully charged before
you start using it . use the ac adaptor to charge from a power
socket . your headset indicates the charging level while charging:
What you see
flashing Green
solid Green
Please note: The lifetime of the battery will be significantly
reduced if your device is left uncharged for a long period. We
therefore recommend that you recharge your device at least
once a month.
bATTERy LEvEL
after turning on the headset you can check the battery level by
tapping the volume up(+) or volume down(-) . Green flashes indicate
that the headset is fully charged, yellow that the power is 70% and red
that the power is low and that the headset needs to be charged .
xxxxxxx
TURNiNg yoUR hEAdSET oN ANd off
• Press the answer/end button until you see a burst of flashes on
the indicator light (led) to turn on your headset .
• Press and hold the answer/end button until you see a burst of
flashes on the indicator light (led) to turn the headset off .
Jabra bT3030 blueTooTh headseT
Status
charging
fully charged
5