Editing; Dubbing To A Vcr - JVC GR-D250AA Instructions Manual

Dubbing To A VCR

To AV connector
Audio/Video
cable
(provided)
1 2
A
Yellow to VIDEO IN
B
Red to AUDIO R IN
C
White to AUDIO L IN
Open the cover.
3
VCR
1
Following the illustrations, connect the
camcorder and the VCR's input connectors.
2
Start playback on the camcorder. (
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 13)
To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIME" to "AUTO", "ON" or "OFF".
TV
( pg. 22, 27)
• Time code
Set "TIME CODE" to "OFF" or "ON".
( pg. 22, 27)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". (

EDITING

pg. 22, 27)
35
EN
pg. 20)