Table of Contents
Advertisement
owner's manual
two-channel full-range amplifier
Thank you for purchasing a JL Audio amplifier for
your automotive sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vehicle.
For maximum performance and extended warranty
coverage, we highly recommend that you have your new amplifier
installed by an authorized JL Audio dealer. Your authorized
dealer has the training, expertise and installation equipment to ensure
optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier's operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 443-1100 during business hours.
Advertisement
Table of Contents
Related Manuals for JL Audio Slash v2 300/2V2
Summary of Contents for JL Audio Slash v2 300/2V2
- Page 1 If you have any questions regarding the instructions in this manual or any aspect of your amplifier’s operation, please contact your authorized JL Audio dealer for assistance. If you need further assistance, please call the JL Audio Technical Support Department...
-
Page 2: Protect Your Hearing
(pg. 6) +12VDC Ground Remote 300 / 2 Two-Channel Full-Range Amplifier 2 | JL Audio - 300/2 Owner’s Manual Cooling efficiency Considerations: Your JL Audio amplifier employs an advanced type of heat management, called RealSink™. This feature takes advantage of convection and radiation effects to remove heat from the amplifier circuitry. -
Page 3: Product Description
ProduCt desCriPtion The JL Audio 300/2v2 is a two-channel full- 6) Find a good, solid metal grounding point range amplifier utilizing patented Absolute close to the amplifier and connect the Symmetry™ Class A/B technology for both negative power wire to it using appropriate channels. -
Page 4: Crossover Controls
To use speaker-level sources, splice the speaker output wires of the source unit or small amplifier onto a pair of RCA plugs or use the JL Audio ECS Speaker Wire to RCA adaptor (XB-CLRAIC2-SW). 6 | JL Audio - 300/2 Owner’s Manual... -
Page 5: Speaker Outputs
“Input Range” switch. A JL Audio amplifier receiving signal from this preamp output should have its “Input Range” switch set to “Low”. - Page 6 If your amplifier fails or malfunctions, please return it to your authorized JL Audio dealer so that it may be sent in to JL Audio for service. There are no user serviceable parts or fuses inside the amplifier. The unique nature of the circuitry in the JL Audio amplifiers requires specifically trained service personnel.
- Page 7 Because each to measure one channel. If bridged, make sure JL Audio amplifier will always deliver the you test the voltage at the correct connectors same amount of power within its operational (L+ and R–).
- Page 8 Check the input connectors to ensure that they all are making good contact with the input jacks on the amplifier. 14 | JL Audio - 300/2 Owner’s Manual “my amplifier shuts off once in a while, usually at higher volumes”...
- Page 9 16 | JL Audio - 300/2 Owner’s Manual...
- Page 10 Use this diagram to document your amplifier’s switch and control positions. +12VDC Ground Remote 300 / 2 Two-Channel Full-Range Amplifier 18 | JL Audio - 300/2 Owner’s Manual Preamp Output Section Amp Filter Controls Amplifier Input Section Output Mode Freq.
- Page 11 - amPliFiers (usa) JL AUDIO warrants this product to be free of defects in materials and workmanship for a period of ninety (90) days from the original date of purchase. The warranty term is extended to two (2) years if installation is performed or approved by an authorized JL AUDIO dealer (proof of installation or approval required on purchase receipt).