Operations; Basic Operations - Clarion DB155 Owner's Manual

6. OPERATIONS

Basic Operations

CAUTION
Be sure to lower the volume before
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [SRC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [SRC] button for 1 second
or longer to turn off the power for the unit.
Selecting a mode
1. Press the [SRC] button to change the
operation mode.
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
Radio mode CD mode
Note:
• If the CD mode is selected when no disc is
inserted, the display shows "NO DISC".
Adjusting the volume
Turning the [ROTARY] knob clockwise
increases the volume; turning it
counterclockwise decreases the volume.
∗ The volume level is from 0 (minimum) to 33
(maximum).
Switching the display
Press the [D] button to select the desired display.
Each time you press the [D] button, the display
switches in the following order:
Main display Clock display
8
DB155
Note:Be sure to read this chapter referring to the front diagrams of
chapter "2. CONTROLS" on page 3 (unfold).
Setting the Z-Enhancer
This unit are provided with 3 types of sound tone
effects stored in memory. Select the one you prefer.
∗ The factory default setting is "Z-EHCR OFF".
1. Each time you press the [Z] button, the tone
Audio Mode Adjustments
1. Press the [A-M] button to select the
2. Turning the [ROTARY] knob to adjust the
3. When the adjustment is complete, press the
Radio mode...
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the
low sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
∗ The factory default setting is off.
1. Press and hold the [A-M] button for 1 second or
Turning the screen saver function
on or off
This unit is provided with the screen saver
Main display...
function.
effect changes in the following order:
"Z-ENHANCER 1" (bass emphasized)
"Z-ENHANCER 2" (treble emphasized)
"Z-ENHANCER 3" (bass and treble
emphasized) "Z-EHCR OFF" (no sound
effect) "Z-ENHANCER 1"...
adjustment mode. The mode switches as
follows each time the [A-M] button is pressed:
BASS TREB BAL
mode
∗ When the Z-Enhancer function is turned on,
BASS (bass) and TRE (treble) cannot be
selected.
selected audio mode.
BASS (bass): Adjustment range: –7 to +7
TREB (treble): Adjustment range: –7 to +7
BAL (balnce): Adjustment range: L13 to R 13
FAD (fader): Adjustment range: F12 to R12
[A-M] button several times until the function
mode is reached.
∗ The display returns to the previous mode 7
seconds after the adjustment.
longer to turn on the MAGNA BASS EXTEND
effect. "M-B EX" lights in the display on or off.
FAD Previous