Clarion RDX455D Owner's Manual page 9

Clarion cd player owner's manual
Hide thumbs Also See for RDX455D:
Table of Contents

Advertisement

Manual memory function
1) Press the BND button
band you want to store in the memory.
2) Press the Left/Right button
the station you want to store in the memory.
3) Press and hold the Preset button
seconds or longer, then the station will be
stored in the memory.
Auto store function (Automatic Station Store)
1) Press the BND button
band you want to store in the memory.
2) Press and hold the AS button
onds or longer, then the station at which the
reception is the strongest will be automatical-
ly stored in the memory.
Note:
When the number of stations stored is less than six,
the previous content of the memory for each direct
button will be retained.
Preset Scanning (Preset Station Scan)
When the PS button
memory numbers flash and the stations are
tuned in for 7 seconds each in the order in which
they were stored. Press the PS button again to
cancel the preset scanning mode.
Instant Station Recall (ISR)
With this function, a specific radio station can be
recalled from any mode.
ISR memory
1) Press the FNC button
radio mode.
2) Select the radio station which you want to
store in the memory.
3) Press and hold the ISR button
onds or longer.
Recalling ISR
Press the ISR button
show "ISR," then the radio station previously
memorized will be selected. Press the ISR but-
ton
again to disengage the unit from the
7
Recalling ISR function.
16
, and select the
18
then select
9
for 2
, then select the
16
for 2 sec-
6
is pressed, the preset
5
, then select the
3
7
for 2 sec-
then the display will
7
Area Change
Use this function when you are using the car
stereo anywhere outside the U.S.
Switchable frequency spacing
This car stereo is initially set to tune in frequen-
cy intervals of 10 kHz for AM and 200 kHz for
FM, the standard calibrations in the U.S. When
using the unit outside the U.S., use the following
procedure to switch the frequency range.
The table below lists the frequency specifica-
tions for the U.S. and other countries.
Initial Setting
(U.S. standard)
Frequency
10 kHz
spacing
AM
530 to
Frequency
range
1,710 kHz
Frequency
200 kHz
spacing
FM
87.9 to
Frequency
range
107.9 MHz
Switching the area change
Outside U.S. (New Setting)
While pressing the BND button
14
button
, then "outside U.S." will be selected.
Inside U.S. standard (Initial Setting)
While pressing the BND button
13
RDM button
, then the "U.S. standard" will be
selected.
New Setting
(outside U.S.)
9 kHz
531 to
1,629 kHz
50 kHz
87.5 to
108 MHz
16
, press the RPT
16
, press the
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdx555d

Table of Contents