Basic Operations; Setting The Clock - Clarion RDX455D Owner's Manual

Clarion cd player owner's manual
Hide thumbs Also See for RDX455D:
Table of Contents

Advertisement

8. OPERATION

Basic Operations

CAUTION
When this unit is turned on, starting and stop-
ping the engine of a car with its volume raised
to the maximum level may harm your hearing.
Be careful about adjusting the volume.
Turning ON the Power and Adjusting
the Volume
1) Press the POWER button
To turn off the power, press the POWER button
*
3
for 1 second or longer.
2) Press the FNC button
operation mode. Every time the FNC button
is pressed, the display changes the oper-
3
ation mode as:
Radio
CD
CD changer
Radio
Notes:
The operation mode not connected to the unit will not
be selected.
If the CD mode is selected when no disc is inserted,
the display flashes " DISC " and the mode will be
switched to the radio mode instead.
3) Adjust the volume by pressing the Up/Down
2
button
.
: Sets the volume up.
: Sets the volume down.
Audio Mode Adjustments
1) Press the A-M button
you want to adjust. Every time the A-M button
is pressed, the display changes as:
17
BASS/TRE
BAL/FAD
mode
2) After selecting a mode, adjust the mode by
using either the Left/Right button
Up/Down button
2
<Bass adjustment>
: Increases the bass.
: Decreases the bass.
<Treble adjustment>
: Increases the treble.
: Decreases the treble.
.
3
and select another
3
MD changer
17
and select the mode
originally selected
18
, or the
.
<Balance adjustment>
: The volume of the right speakers are
increased.
: The volume of the left speakers are
increased.
<Fader adjustment>
: The volume of the front speakers are
increased.
: The volume of the rear speakers are
increased.
Setting the Z-enhancer
This unit comes with three types of sound tone
effects stored in memory. Select the one you prefer.
The factory default setting is "Z-EHCR OFF".
*
Each time you press Z-EHCR button
tone effect changes in the following order.
"Z-ENHANCER 1"
"Z-ENHANCER 2"
"Z-ENHANCER 3"
"Z-EHCR OFF"
"Z-ENHANCER 1"...
• Z-ENHANCER 1: bass emphasized
• Z-ENHANCER 2: treble emphasized
• Z-ENHANCER 3: bass and treble emphasized
• Z-EHCR OFF: no sound effect
Loudness Effect
In order to turn on/off the loudness effect, use
17
the LD button
for 2 seconds or longer. Every
time the LD button
17
seconds or longer, the loudness effect switches
on and off.
When the loudness effect is on, the display will show
*
"LOUD."
Switching the Clock Display
While pressing the BND button
the DISP button
is pressed, the display will
12
change between the operation mode and the
clock display.

Setting the Clock

1) While pressing the BND button
DISP button
12
display.
2) While pressing the BND button
hold the DISP button
longer.
3) Press the Left button
hour.
8
, the
is pressed and held for 2
16
, every time
16
, press the
to display the clock
16
, press and
for 2 seconds or
12
18
, then set the current
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdx555d

Table of Contents