Resetting The Controller; Resetting The Channels Only; Resetting The Network And Channels - Intermatic HA09 Instructions Manual

Handy remote controller
Table of Contents

Advertisement

Resetting the Controller

If needed, you can reset the NETWORK and CHANNEL
settings individually or both together.
NOTE: When resetting a controller, for best results, each
module within the system should be individually reset also.

Resetting the NETWORK and CHANNELS

This function will completely reset all CHANNEL and
NETWORK SETTINGS on the controller.
1.
Press and hold INCLUDE and DELETE buttons at the
same time for 10 seconds. The red and green LED's
will flash.
2.
Hold the Channel 1 ON/DIM and OFF/DIM buttons until
the green LED turns solid.
This function will completely reset all CHANNEL settings
without erasing NETWORK information on the controller.
1.
Press and hold INCLUDE and DELETE buttons at the
same time for 10 seconds. The red and green LED's
will flash.
2.
Hold the Channel 2 ON/DIM and OFF/DIM buttons until
the green LED turns solid.
Page 13 of 20
Resetting CHANNELS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents