Authorisation

forgot your password?

Hotpoint VVSR1070DWW Specifications

Hotpoint vvsr1070dww: specifications.

 
VVSR1070DWW – Hotpoint 3.2 Cu. Ft. Super Capacity Washer
Washer Dimensions (in inches)
25-1/2
36
Side View
Specification Created 6/03
®
27
51
42
Rear View
Circuit Requirements: An individual, properly-grounded branch circuit,
with a three-prong grounding-type receptacle, protected by a 15 or
20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 115V, 60Hz, 10 Amps
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
Washer Note: Washer wall outlet must be located within 36" of
service cord entry. Wall outlet must not be located behind dryer.
Listed by
Underwriters
R
Laboratories
Next page ->

Summary of Contents

  • Page 1

    ® VVSR1070DWW – Hotpoint 3.2 Cu. Ft. Super Capacity Washer Washer Dimensions (in inches) 25-1/2 Side View Specification Created 6/03 Circuit Requirements: An individual, properly-grounded branch circuit, with a three-prong grounding-type receptacle, protected by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.

  • Page 2

    ® VVSR1070DWW – Hotpoint 3.2 Cu. Ft. Super Capacity Washer Specification Created 6/03 Features and Benefits • Rotary electromechanical controls – Allow fast, easy cycle selection. • One wash/spin speed – Spins clothes at a consistent speed to remove moisture from clothes.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: