Advertisement
Quick Links
HOT WIRE FOAM CUTTER CT4543
Ref no. MJHW001
ORIGINAL INSTRUCTIONS
IMPORTANT:
These instructions accompanying the product are the original instructions. This
document is part of the product, keep it for the life of the product passing it on to
any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Advertisement
Related Manuals for Neilsen CT4543
Summary of Contents for Neilsen CT4543
- Page 1 HOT WIRE FOAM CUTTER CT4543 Ref no. MJHW001 ORIGINAL INSTRUCTIONS IMPORTANT: These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before assembling, operating or maintaining this product.
-
Page 3: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: HOT WIRE FOAM CUTTER Model: CT4543 (Ref no. MJHW001) Applicable EC Directives: EC Low Voltage Directive 2014/35/EU EC Directive of Electromagnetic Compatibility 2014/30/EU... -
Page 4: Specification
1. SPECIFICATION Technical specification for the adaptor Input: 100-240V~50/60Hz, Output: DC 5.0V 2.0A Wattage: Hot Wire Tip: 8.7W Hot Knife Tip: 9.6W Engraver Tip: 4.2W Pre-heat Time Hot Wire Tip: 30 sec Hot Knife Tip: 60 sec Engraver Tip: 120 sec Max Tip Temperature Hot Wire Tip: 150 Hot Knife Tip: 200... - Page 5 2.2 Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) CAUTION –...
-
Page 6: Unpacking And Checking
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. - Page 7 4. OPERATING INSTRUCTIONS 1. Draw the design on the foam. Or cut a pattern, pin to the foam, and make a rough trace of the pattern, then remove pattern. 2. Choose your tip and insert into handle, ensure position is secured. 3.
- Page 8 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...