Auto Detect Mode On - Harman Kardon SIGNATURE 2.0 Service Manual

Signature 2.0 Processor/Tuner
Steps to turn Auto Detect Mode ON for Sig. 2.0 version 2.10
This can be accomplished by viewing the On Screen Display or the front panel
display.
1) Turn the unit ON. TV PRO LOGIC should be in the display
2) Press the MENU button on the remote control. SET-UP MENU RECORD OUTPUTS
should be in the display.
3) Press the "down" arrow button on the remote; SOURCES should be in the display.
4) Press the right arrow button on the remote; SOURCES TV should be in the display.
5) Press the "down" arrow button on the remote until AUDIO ANALOG 2 is in the display.
6) Press the right arrow button on the remote until DIGITAL 1 is in the display.
7) Press the "down" arrow button on the remote until AUTO MODE DETECT : OFF is in the
display.
8) Press any arrow button on the remote to display AUTO MODE DETECT: AUTO
9) Press the MENU button twice on the remote to return to the beginning of the menu choices.
40
harman/kardon