Contec PCB68PS-0.5P User Manual

Shielded Cable With Two 68pin Connector
PCB68PS-0.5P, PCB68PS-1.5P,
PCB68PS-3P, PCB68PS-5P
This products are cables for connecting a 68-pin 0.8mm-pitch connector on CONTEC board with 68-pin
0.8mm-pitch connector.
External Dimensions
9mm
34
68
1 35
Specifications
Item
Connector used
Cable
Weight
Notes!
- Do not strike or bend the product. Otherwise, the product may malfunction, overheat, cause a
failure or breakage.
- Do not insert or remove the connector while the power is turned on to the PC. Failure to observe
this precaution may cause malfunction, overheating.
- The specifications of this product are subject to change without notice for quality improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
- Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for any results of using the product.
- All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
1
User's Guide
CONTEC CO.,LTD.
PCB68PS-0.5P
PCB68PS-1.5P
PCB68PS-3P
33.69mm
PCB68PS-5P
15mm
68-pin 0.8mm-pitch connector HDRA-E68MA1 [HONDA] or equivalent x 2
Thumb screw: M2
68 core shield cable (34pair). Conductor size: AWG#30
Conductor composition: 7pcs/0.1mm UL20276
160g(PCB68PS-0.5P), 280g(PCB68PS-1.5P), 460g(PCB68PS-3P), 700g(PCB68PS-5P)
PCB68PS-0.5P, PCB68PS-1.5P, PCB68PS-3P, PCB68P-5P
500mm
1,500mm
3,000mm
33.69mm
5,000mm
15mm
Specification
9mm
1
35
68 34