Download
Share
Print this page
Canon PIXMA MX350 Series Getting Started Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. All in One Printer
  5. PIXMA MX350
  6. Getting started manual
Canon PIXMA MX350 Series Getting Started Manual

Canon PIXMA MX350 Series Getting Started Manual

Wireless office all-in-one printer
Hide thumbs Also See for PIXMA MX350 Series:

Advertisement

Quick Links

Download this manual See also: Installation Manual
Office All-In-One
Equipo multifunción de oficina

Getting Started

Read Me First

Guía de inicio
Léame en primer lugar
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
Asegúrese de leer este manual antes de usar el equipo. Consérvelo a mano para utilizarlo como referencia en el futuro.
series
ENGLISH
ESPAÑOL

Advertisement

loading

Related Manuals for Canon PIXMA MX350 Series

Summary of Contents for Canon PIXMA MX350 Series

  • Page 1: Getting Started

    Office All-In-One Equipo multifunción de oficina series Getting Started Read Me First Guía de inicio Léame en primer lugar Make sure to read this manual before using the machine. Please keep it in hand for future reference. Asegúrese de leer este manual antes de usar el equipo. Consérvelo a mano para utilizarlo como referencia en el futuro. ENGLISH ESPAÑOL...

  • Page 2: Symbols Used In This Document

    ■ Symbols Used in This Document Prohibited actions. Instructions including important information. Informational notes. Operations that take some time to complete. Indicates operations in Windows. Indicates operations in Macintosh. In this guide, Windows 7 operating system is referred to as Windows 7 and Windows Vista operating system as Windows Vista.
  • Page 3 On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. For some languages parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 75. Los manuales en pantalla se pueden ver en un ordenador.
  • Page 4 ■ Contents 1 Check the Included Items P.5 2 Remove the Protective Material P.6 3 Connect the Telephone Line P.9 4 Turn the Power On P.11 5 Install the FINE Cartridges P.14 6 Load Paper P.19 7 Set Up for Fax Reception P.21 8 Select Connection Method P.25 9 Install the Software (USB Connection) P.27 10 Wireless Setup P.35...

  • Page 5: Machine Installation

    ■ Machine Installation Flow USB Connection ■ Flujo de instalación Conexión USB del equipo Machine Preparation Preparación del equipo Fax Reception Setup Configuración de recepción de faxes Software Installation Instalación del software Wireless Connection Conexión inalámbrica Machine Wireless Setup Configuración inalámbrica del equipo P.25 - 26, 35 - 53 Software Installation...
  • Page 6 ■ Dispositivos necesarios para la conexión inalámbrica/por cable When using the machine over a wireless/wired connection, the following devices are required depending on the connection method. Cuando el equipo se utilice mediante una conexión inalámbrica/por cable, se necesitarán los dispositivos siguientes en función del método de conexión. Wireless Connection Conexión inalámbrica A commercial access point or router that supports IEEE802.11b/g is required.
  • Page 7 Check that all the items shown below are included in the box. Compruebe que todos los elementos que se citan a continuación están incluidos en la caja. Color FINE cartridges Color Cartuchos FINE (FINE Cartridges) Setup CD-ROM (containing the drivers, applications and on-screen manuals) Setup CD-ROM (que contiene los controladores, las aplicaciones...
  • Page 8 Remove all the protective materials and orange tape from the outside of the machine. • The tape and protective materials may differ in shape and position from what they actually are. Retire la cinta naranja y todos los materiales protectores del exterior del equipo. •...
  • Page 9 Lift the Scanning Unit (Cover) (B) and fix it with the Scanning Unit Support (C). Close the Document Cover (D) and lift it with the Scanning Unit (Cover). Levante la unidad de escaneado (cubierta) (B) y sujétela con el soporte de la unidad de escaneado (C).
  • Page 10 Lift the Scanning Unit (Cover) slightly (1) and fold the Scanning Unit Support (2), then gently close the Scanning Unit (Cover) (3). Levante la unidad de escaneado (cubierta) ligeramente (1) y pliegue el soporte de la unidad de escaneado (2) para cerrar después la unidad de escaneado (cubierta) (3) con cuidado.
  • Page 11 Do not turn the power on yet. No encienda aún el equipo. To use the machine as a fax, a telephone line needs to be connected. This section describes the basic method of telephone line connection. For other connection methods, refer to the on-screen manual: Basic Guide. When not using as a fax: Go to "4 Turn the Power On"...
  • Page 12 Connect one end of supplied telephone line cable (A) to the lower connector labeled "L" on the machine, and then connect the other end to the telephone jack on the wall (B). When using as a fax only: Go to "4 Turn the Power On" on page 11. Conecte un extremo del cable de teléfono suministrado (A) al conector inferior con la etiqueta "L"...
  • Page 13 • Do not install the machine where an object may fall on it. The object may fall inside the machine, resulting in malfunction. • Do not place any object on top of the machine. It may fall into the machine when opening covers, resulting in malfunction.
  • Page 14 Press the ON button (B) to turn on Use the { or } button (C) on the Operation Panel to select the machine. the language for the LCD (Liquid Crystal Display) (D), then press the OK button. Pulse el botón ACTIVADO (ON) (B) Utilice el botón { o } (C) del panel de control para seleccionar para encender el equipo.
  • Page 15 When it is necessary to power off the machine Cuando sea necesario apagar el equipo Be sure to follow the procedure below. 1. Press the ON button (A) to turn off the machine. 2. Make sure that all the lamps on the Operation Panel are not lit. Operating noise may continue for up to 30 seconds until the machine turns off.
  • Page 16 Lift the Scanning Unit (Cover) (A) and fix it with the Scanning Unit Support (D). Close the Document Cover (E) and lift it with the Scanning Unit (Cover). Levante la unidad de escaneado (cubierta) (A) y sujétela con el soporte de la unidad de escaneado (D).
  • Page 17 Make sure that the FINE Cartridge Follow the next procedure to insert the Black Holder (H) moves to the installation Color position. slots Asegúrese de que el soporte de Siga el procedimiento que se indica a continuación cartucho FINE (FINE Cartridge Holder) para insertar los cartuchos FINE (FINE Cartridges) (H) se desplaza hasta la posición de negro...
  • Page 18 Remove the Black FINE Cartridge from its package. • Handle the FINE Cartridges carefully. Do not drop or apply excessive pressure to them. • Be sure to use the supplied FINE Cartridges. • Be careful not to stain your hands or surrounding work area with ink on the removed protective tape. •...
  • Page 19 Place the Black FINE Cartridge into the right slot • Do not knock the FINE Cartridge against the sides of the holder. • Install in a well-lit environment. • Install the Black FINE Cartridge into the right slot and the Color FINE Cartridge into the left slot Coloque el cartucho FINE (FINE Cartridge) negro...
  • Page 20 Insert the Color FINE Lift the Scanning Unit (Cover) slightly (1) and fold Cartridge into the left the Scanning Unit Support (2), then gently close FINE Cartridge Holder the Scanning Unit (Cover) (3). in the same way as the Black FINE Cartridge. •...
  • Page 21 Open the Paper Support (A). Abra el soporte del papel (A). Move the Paper Guides (B) to both edges. Desplace las guías del papel (B) hasta ambos bordes.
  • Page 22 Load paper in the center of the Rear Tray (C). Load paper in portrait orientation with the printing side facing up. Cargue el papel en el centro de la bandeja posterior (C). Cargue el papel con orientación vertical con la cara de impresión hacia arriba. Slide the left and right Paper Guides against both edges of the paper.
  • Page 23 Read this section only when using the machine as a fax. If not using the machine as a fax, go to "8 Select Connection Method" on page 25. Lea esta sección sólo si va a utilizar el equipo como fax. De lo contrario, vaya a “8 Selección del método de conexión”...
  • Page 24 Intended Use Uso previsto Want to use a telephone line for voice calls and faxes. • • Want to prioritize voice call reception over fax call reception because there are more opportunities to receive voice calls. • Want to automatically receive voice messages and faxes, connect the answering machine to the fax. •...
  • Page 25 Responses to Calls in Each Mode Respuestas a llamadas en cada modo When a fax call arrives: Si recibe una llamada de fax: While the telephone's ringtone sounds, pick up the handset. When the fax reception starts, replace the handset. If an answering machine is connected, the fax is received automatically.
  • Page 26 Press the FAX button (A). The fax standby screen is displayed. Pulse el botón FAX (A). Aparecerá la pantalla de fax en espera. Press the FUNCTION button (B), then select a receive mode using the { or } button (C). Pulse el botón FUNCIÓN (FUNCTION) (B) y seleccione después un modo de recepción con el botón { o } (C).
  • Page 27 Intended Use Uso previsto • Want to connect to a computer with a USB cable. • Si desea conectarlo a un ordenador con un cable USB. • Want to connect to computers without using cables. • Want to use from multiple computers. •...
  • Page 28 What is Network? A system to exchange information between computers by connecting them to each other with cables or via wireless communication. The Internet and LAN are types of networks. What is LAN (Local Area Network)? A type of network that connects computers to each other within a limited area (room, building, etc.). ¿Qué...
  • Page 29 Do not connect the USB cable yet. No conecte aún el cable USB. • To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.) •...
  • Page 30 □ If you connect the machine via USB cable before installing the software: □ Si se conecta el equipo mediante un cable USB antes de instalar el software: For Windows 7 1. Remove the USB cable connected to your computer. 2.
  • Page 31 Press the ON button (A) to TURN OFF THE MACHINE. Operating noise may continue for up to 30 seconds until the machine turns off. • Do NOT connect the USB cable to the computer and the machine yet. If you have already connected the cable, disconnect it now.
  • Page 32 Windows 7/Windows Vista Windows XP/Windows 2000 Click Run Msetup4.exe on the AutoPlay screen, then click Continue or Yes on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Continue or Yes. Haga clic en Ejecutar Msetup4.exe (Run Msetup4.exe) en la pantalla Reproducción automática (AutoPlay) y, a continuación, haga clic en Continuar (Continue) o en Sí...
  • Page 33 Click Easy Install. The drivers, application software, and on-screen manuals are installed all together. • If you want to select particular items to install, click Custom Install. For Windows 7/Windows Vista SP1 or later • You can install the XPS Printer Driver from Custom Install. When installing the XPS Printer Driver, select the MP Drivers at the same time.
  • Page 34 Select Use the printer via USB, then click Next. Follow any on-screen instructions to proceed with the software installation. Seleccione Utilizar la impresora mediante USB (Use the printer via USB) y, a continuación, haga clic en Siguiente (Next). Siga cualquier instrucción en pantalla para llevar a cabo la instalación del software. □...
  • Page 35 □ Necessary Information for the User Registration □ Información necesaria para el registro de usuario (User Registration) Serial No. * * * * * * * * * The product serial number is • If the power is on, the FINE Cartridge required when registering the Holder will move when the Scanning product.
  • Page 36 Click Exit to complete the installation. If Restart is displayed, follow the instruction to restart the computer. For Macintosh: It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time. • Remove the Setup CD-ROM and keep it in a safe place.
  • Page 37 Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or router is complete. Antes de conectar el equipo a la red, se debe conectar el ordenador a la red.
  • Page 38 ■ Notas acerca de la conexión inalámbrica • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer. • In an office setup, consult your network administrator.

  • Page 39: Check The Information For Wireless Connection

    * También se conoce como SSID. Identificador del punto de acceso específico. You can retrieve your network key by using the Canon PIXMA Wireless Setup Assistant or the instructions which can be downloaded from the Canon support webpage (www.usa.canon.com/downloadlibrary). If you are unable to retrieve the network key or other settings, refer to the manual of your access point or router, or contact its manufacturer.
  • Page 40 If you choose one of these connection methods, skip the "Easy Setup" section and proceed the desired section (WPS or WCN). Si elige uno de estos métodos, omita la sección “Configuración fácil (Easy Setup)” y continúe con la sección deseada (WPS o WCN). □...
  • Page 41 Press the Setup button (A). The Setup menu screen is displayed. Pulse el botón Configuración (Setup) (A). Aparecerá la pantalla Menú Configurar (Setup menu). Use the [ or ] button (B) to select Wireless LAN setup, then press the OK button. Utilice el botón [ o ] (B) para seleccionar Configuración LAN inalám.
  • Page 42 Select Easy setup, then Select the access point name you wrote press the OK button. down on page 37, then press the OK button. • If you are living in an apartment, nearby access points in use may be detected. Seleccione Seleccione el nombre del punto de Configuración fácil...
  • Page 43 Make sure that the When the above screen appears, press the OK button. network key is correct, then press the OK The Setup menu screen returns. button. • If Failed to connect to the access point. appears, press the OK button, make sure that the network key is correct, then enter it again.
  • Page 44 Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). If not using WPS, the following procedure is not necessary. Lea esta sección sólo si utiliza una conexión inalámbrica mediante WPS (Wi-Fi Protected Setup). Si no utiliza WPS, no es necesario el siguiente procedimiento.
  • Page 45 Use the [ or ] button (B) to select Wireless LAN setup, then press the OK button. Utilice el botón [ o ] (B) para seleccionar Configuración LAN inalám. (Wireless LAN setup) y, a continuación, pulse el botón OK. Use the { or } button (C) to select Yes, then press the OK button. When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.
  • Page 46 Select WPS, then press Select Push button method, then press the OK button. the OK button. • To use the PIN code method for setup, select PIN code method in point. When the screen in A timeout error occurs if setup is not completed within 10 minutes. If the timeout error screen appears, press the OK button, then perform the setup again and set the new PIN code displayed on the screen to the access point.
  • Page 47 Press and hold the WPS button on the access point (for about 5 seconds), then press the OK button on the machine within 2 minutes. For details on the WPS button pressing, refer to the manual of your access point. The Wi-Fi lamp (blue) flashes while searching for or connecting to an access point.
  • Page 48 Press the COPY button (E). The copy standby screen is displayed. Pulse el botón COPIA (COPY) (E). Aparecerá la pantalla de copia en espera. Next, read "12 Install the Software (Network Connection)" on page 59! A continuación, lea “12 Instalación del software (Conexión de red)” en la página 59.
  • Page 49 Antes de configurarla mediante la función WCN, establezca una comunicación inalámbrica entre el ordenador y el punto de acceso. • Canon no asume ninguna responsabilidad en el caso de que se pierdan o dañen los datos almacenados en la unidad flash USB, con independencia del motivo, incluso dentro del periodo de garantía.
  • Page 50 Windows Vista From the Start menu of the Windows Click Add a wireless device on the side, click Network. menu. The Add a wireless device to the network screen will be displayed. The Network folder opens. En el menú Inicio (Start) de Haga clic en Agregar un dispositivo Windows, haga clic en Red inalámbrico (Add a wireless device)
  • Page 51 From the list, select the network name (SSID), then click Next. • If the User Account Control dialog box appears, click Continue. If the same dialog box reappears in subsequent steps, click Continue. En la lista seleccione el nombre de la red (SSID) y, a continuación, haga clic en Siguiente (Next).
  • Page 52 Windows 7 Click Start > Control Panel > View Select the network name (SSID) from network status and tasks > Manage the list and right-click it, then select wireless networks. Properties. Haga clic en Iniciar (Start) > Panel Seleccione el nombre de la red (SSID) de control (Control Panel) >...
  • Page 53 Press the Setup button (A). The Setup menu screen is displayed. Pulse el botón Configuración (Setup) (A). Aparecerá la pantalla Menú Configurar (Setup menu). Use the [ or ] button (B) to select Wireless LAN setup, then press the OK button. Utilice el botón [ o ] (B) para seleccionar Configuración LAN inalám.
  • Page 54 Select Other setup, then press the OK Select WCN, then press the OK button. button. Seleccione Otra configuración Seleccione WCN y, a continuación, (Other setup) y, a continuación, pulse pulse el botón OK. el botón OK. Connect the USB flash drive to the Direct Print Port (USB connector) (E) on the front of the machine, then press the OK button.
  • Page 55 When the above screen appears, press the OK button, then remove the USB flash drive from the machine. The Setup menu screen returns. Cuando aparezca la pantalla anterior, pulse el botón OK y extraiga a continuación la unidad flash USB del equipo.
  • Page 56 Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and router is complete. Antes de conectar el equipo a la red, se debe conectar el ordenador a la red. Asegúrese de que haya finalizado la configuración del ordenador y del router.
  • Page 57 ■ Notes on Wired Connection ■ Notas acerca de la conexión por cable • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer. •...
  • Page 58 Remove the Cap (A), then connect a network device (router, etc.) with an Ethernet cable (B). Retire la tapa (A); a continuación, conéctese a un dispositivo de red (router, etc.) con un cable Ethernet (B). Press the Setup button (C). The Setup menu screen is displayed.
  • Page 59 Use the [ or ] button (D) to select Device settings, then press the OK button. Utilice el botón [ o ] (D) para seleccionar Configuración de dispositivo (Device settings) y, a continuación, pulse el botón OK. Use the { or } button (E) to select LAN settings, then press the OK button.
  • Page 60 Select Wired LAN active, press the OK button. The LAN settings screen returns. Seleccione LAN cableada activa (Wired LAN active) y, a continuación, pulse el botón OK. Volverá a aparecer la pantalla Configuración de LAN (LAN settings). Press the COPY button (F). The copy standby screen is displayed.
  • Page 61 Si tiene activada la función de cortafuegos en el software de seguridad, puede aparecer un mensaje indicando que el software de Canon está intentando acceder a la red. En tal caso, configure el software de seguridad para que permita siempre el acceso.
  • Page 62 □ Easy-WebPrint EX If you are using Internet Explorer 7 or later, you can use the Web print software Easy-WebPrint EX. An internet connection is required for installation. □ Easy-WebPrint EX Si utiliza Internet Explorer 7 o posterior, puede utilizar el software de impresión para web Easy-WebPrint EX.
  • Page 63 Windows 7/Windows Vista Windows XP/Windows 2000 Double-click the Setup icon of the CD-ROM folder to proceed to the following screen. Enter your administrator name and password, then click OK. If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. If you do not know your administrator name or password, click the help button, then follow the on-screen instructions.
  • Page 64 Click Easy Install. The drivers, application software, and on-screen manuals are installed all together. • If you want to select particular items to install, click Custom Install. For Windows 7/Windows Vista SP1 or later • You can install the XPS Printer Driver from Custom Install. When installing the XPS Printer Driver, select the MP Drivers at the same time.
  • Page 65 Select Use the printer on network, then click Next. Follow any on-screen instructions to proceed with the software installation. Seleccione Utilizar la impresora de la red (Use the printer on network) y, a continuación, haga clic en Siguiente (Next). Siga cualquier instrucción en pantalla para llevar a cabo la instalación del software. When the Printer Detection screen appears, click Next.
  • Page 66 When the Detected Printers List dialog box appears, select Canon MX350 series, then click Next. When the Setup Completion dialog box appears, click Complete. • If the machine is not detected, Check Printer Settings dialog box is displayed. Refer to the printed manual: Network Setup Troubleshooting.
  • Page 67 This section describes how to register the machine on a Macintosh computer. Windows users: read “Install the Software (Information)” on page 69. When the Register Printer and Scanner screen appears, click Register Printer. En esta sección se describe cómo registrar el equipo en un ordenador Macintosh.
  • Page 68 Go to v.10.5.x v.10.4.11 Go to • The alphanumeric characters after Canon MX350 series is the machine’s Bonjour service name or MAC address. • If the machine has not been detected, make sure of the following. − The machine is turned on.
  • Page 69 Cuando aparezca la pantalla No hay impresoras disponibles. (You have no printers available.), haga clic en Añadir (Add). Select Canon IJ Network in the pop-up Make sure that Canon MX350 series menu, select Canon MX350 series in is added to the list of printers.
  • Page 70 Cuando aparezca la pantalla Registro de la impresora y del escáner (Register Printer and Scanner), haga clic en Registrar el escáner (Register Scanner). Select Canon MX350 series on the Click Next on the Register Printer and Scanner Scan-from-PC Settings screen, then screen.
  • Page 71 Click Next. Follow any on-screen instructions to proceed with the software installation. Haga clic en Siguiente (Next). Siga cualquier instrucción en pantalla para llevar a cabo la instalación del software.
  • Page 72 □ Necessary Information for the User Registration □ Información necesaria para el registro de usuario (User Registration) The product serial number is required when registering the product. The serial number is located inside the machine (as shown in the illustration). A la hora de registrar el producto, es necesario su número de serie.
  • Page 73 Click Exit to complete the installation. If Restart is displayed, follow the instruction to restart the computer. For Macintosh: It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time. • Remove the Setup CD-ROM and keep it in a safe place.
  • Page 74 Using the Machine from Additional Computers Now that the wireless/wired connection of the machine is complete, it can be used from additional computers on the same network. Install software including the drivers on the computer from which you want to use the machine. Other settings are not required. For the software installation procedure, refer to “12 Install the Software (Network Connection)”...
  • Page 75 If the machine is already connected to a wireless /wired connection, it can be used from additional computers on the same network. Si el equipo ya está conectado a una conexión inalámbrica/por cable, se puede utilizar desde otros ordenadores de la misma red. To use from additional computers Insert the Setup CD-ROM into the computer from which you want to use the machine.
  • Page 76 Use the Operation Panel on the machine to print your own items easily. Various application software are installed on the computer along with the drivers. You can print creative items by correcting/ enhancing photos using the application software. For details on how to use the application software and the machine, refer to the on-screen manual. Utilice el panel de control del equipo para imprimir fácilmente sus propios elementos.

  • Page 77: Solution Menu

    Solution Menu Solution Menu is a gateway to functions and information that allow you to make full use of the machine! For example, • Open the on-screen manual with a single click. • Open various application software with a single click. Solution Menu Solution Menu es una puerta de acceso a funciones e información que permiten...
  • Page 78 Load A4 or Letter-sized plain paper. Make sure that the Paper Output Tray (A) is open. This section describes how to perform a standard copy. • For details, refer to "6 Load Paper" on page 19. • The machine may make operating noise when feeding paper. This is normal operation.
  • Page 79 Place the document face-down and align it with the Alignment Mark (C). • Do not place objects weighing 4.4 lb / 2.0 kg or more on the Platen Glass (D), or do not apply pressure to the document by pressing on it with a force exceeding 4.4 lb / 2.0 kg. The scanner may malfunction or the glass may break.
  • Page 80 Para obtener más información, consulte “6 Carga del papel” en la página 19. Start Solution Menu from the Canon Solution Menu icon on the desktop (Windows) or on the Dock (Macintosh), then click One-Click to Photo Print. Easy-PhotoPrint EX starts.
  • Page 81 Select the image you want to print, then click Layout/Print. When a photo is selected, the number of copies is set to "1". Seleccione la imagen que desee imprimir y, a continuación, haga clic en Diseño/Imprimir (Layout/Print). Cuando se selecciona una fotografía, el número de copias se establece en “1”. Click Print.
  • Page 82 Press the FAX button (A). The fax standby screen is displayed. This section explains how to send a fax in black and white from the ADF (Auto Document Feeder) (B). • Make sure that the telephone line type is set correctly. For the setting procedure, refer to "Preparing for Faxing" in the on-screen manual: Basic Guide. •...
  • Page 83 Open the Document Tray (C), then move the Document Guides (D) to both edges. • For details on supported documents and settings for image quality, density (brightness), etc., refer to the on-screen manual: Basic Guide. Abra la bandeja de documentos (C) y, a continuación, desplace las guías de documentos (D) hacia ambos bordes.
  • Page 84 Use the Numeric buttons (E) to enter Press the Black button (F). the fax number. The fax is sent. When the machine is ready for faxing, the Black button and Color button light up. • If fax sending is unsuccessful, confirm that the phone line is connected correctly as described in "3 Connect the Telephone Line"...
  • Page 85 After a period of use, the inside of the machine may become stained with ink. To avoid staining your hands or clothes with ink, it is recommended that you clean the Ink Cartridge Locking Cover (A) and the inside of the tray (B) with a facial tissue or the like as required. If the Scanning Unit (Cover) is left open for more than 10 minutes, the FINE Cartridge Holder moves to the right automatically.
  • Page 86 Transmission speed Black: Approx. 3 seconds/page at 33.6 kbps (Based on ITU-T No.1 chart for US specifications and Canon FAX Standard chart No.1 for others, both in standard mode or Canon FAX Standard chart No.1, standard mode.) Color: Approx. 1 minute/page at 33.6 kbps (Based on Canon COLOR FAX TEST SHEET.)

  • Page 87: About Consumables

    Macintosh: Hard Disk must be formatted as Mac OS Extended (Journaled) or Mac OS Extended. • Macintosh: After upgrading from Mac OS X v.10.5 or lower to Mac OS X v.10.6, install software bundled with the Canon inkjet printer. •...
  • Page 88 Memoria Transmisión/recepción: 50 páginas aprox. (Basado en el cuadro n.º 1 de ITU-T para especificaciones de EE UU y en el cuadro n.º 1 del estándar de FAX de Canon para el resto, ambos en modo estándar). Resolución de fax Negro Estándar: 8 píxeles/mm x 3,85 líneas/mm...
  • Page 89 Windows: sólo se garantiza el funcionamiento en un PC con Windows 7, Windows Vista, Windows XP o Windows 2000 preinstalado. • Windows: desinstale primero el software incluido con la impresora de inyección de tinta Canon antes de actualizar de Windows Vista a Windows 7 y, a continuación, vuelva a instalar el software. •...

  • Page 90: Getting Help From Canon

    2973B001 CL-211XL 2975B001 PG-210 2974B001 CL-211 2976B001 Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon online store at www.shop.usa.canon.com CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042 U.S.A. www.usa.canon.com QT5-2841-V02 XXXXXXXX Cómo solicitar ayuda a Canon Soporte técnico por correo electrónico:...