Canon PIXMA MP495 Series Getting Started page 46

Wireless photo all-in-one
Hide thumbs Also See for PIXMA MP495 Series:
Table of Contents

Advertisement

This section describes the procedure for WPS connection, WCN connection and connecting the machine to additional
computers. The procedure is not necessary if the software was installed using the wireless LAN setup cable. Go to page 57.
En esta sección se describe el procedimiento para la conexión WPS, la conexión WCN y la conexión del equipo a ordenadores
adicionales. El procedimiento no será necesario si el software se ha instalado utilizando el cable de configuración LAN
inalámbrica. Vaya a 57.
To use the machine by connecting it to a computer,
software including the drivers needs to be copied
(installed) to the computer's hard disk. The installation
process takes about 20 minutes. (The installation time
varies depending on the computer environment or the
number of application software to be installed.)
Quit all running applications before installation.
Log on as the administrator (or a member of the
Administrators group).
Do not switch users during the installation process.
Internet connection may be required during the
installation. Connection fees may apply. Consult the
internet service provider.
It may be necessary to restart your computer during the
installation process. Follow the on-screen instructions
and do not remove the Setup CD-ROM during
restarting.
The installation resumes once your computer has
restarted.
If the firewall function of your security software is
turned on, a warning message may appear that Canon
software is attempting to access the network. If such a
warning message appears, set the security software to
always allow access.
For the system requirements, refer to "10 Specifications".

Para poder utilizar el equipo conectado a un ordenador, se debe
copiar (instalar) el software, incluidos los controladores, en el disco
duro del ordenador. El proceso de instalación lleva unos 20 minutos.
(El tiempo necesario para instalar varía en función del entorno del
ordenador o de cuánto software de aplicación se vaya a instalar).
Cierre las aplicaciones que se estén ejecutando antes de la instalación.
Inicie la sesión como administrador (o miembro del grupo de
administradores).
No cambie de usuario durante el proceso de instalación.
Durante la instalación, es posible que se tenga que conectar a Internet.
Esto puede implicar gastos de conexión. Consulte con el proveedor de
servicios de Internet.
Es posible que deba reiniciar el ordenador durante el proceso de
instalación. Siga las instrucciones en pantalla y no retire el CD-ROM
de instalación (Setup CD-ROM) mientras se reinicia el equipo.
La instalación se reanuda una vez reiniciado el ordenador.
Si tiene activada la función de firewall en el software de seguridad,
puede aparecer un mensaje indicando que el software de Canon está
intentando acceder a la red. Si aparece dicho mensaje, configure el
software de seguridad para que permita siempre el acceso.
Para obtener información sobre los requisitos del sistema, consulte
"10 Especificaciones".

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4499b026Pixma mp499

Table of Contents