Canon PIXMA MP495 Series Getting Started page 42

Wireless photo all-in-one
Hide thumbs Also See for PIXMA MP495 Series:
Table of Contents

Advertisement

Read this section only
when setting up a wireless
connection by using the WPS
(Wi-Fi Protected Setup).
For details on WPS, refer
to the manual of your
access point.
For the setup procedure
using the PIN code
method, refer to "Setup
Using PIN Code
Method" on page 41.
Lea esta sección sólo
si utiliza una conexión
inalámbrica mediante WPS
(Wi-Fi Protected Setup).
Consulte en el manual del
punto de acceso todos los
detalles sobre WPS.
Para obtener información
sobre el procedimiento
de configuración
mediante el método
de código PIN, vaya
a "Configuración con el
método de código PIN"
en la página 41.
0
1
2
When the
Press and hold the Maintenance button (A) (for about
access point is
5 seconds).
ready, press and
The LED (B) starts to flash.
hold the WPS
The Wi-Fi lamp (blue) (C) flashes while searching for an
access point.
button on the
access point
If a timeout error (E > 2 > 1) appears in the LED, press the Color button, then
(for about 5
start again from
seconds).
If another error appears, refer to the printed manual: Network Setup
Troubleshooting.
Cuando el punto
Mantenga pulsado el botón Mantenimiento
de acceso esté
(Maintenance) (A) (unos 5 segundos).
preparado,
La pantalla LED (B) empezará a parpadear.
mantenga
La luz de Wi-Fi (azul) (C) parpadeará mientras busque
el punto de acceso.
pulsado el botón
WPS del punto
de acceso (unos
Si aparece un error de tiempo de espera agotado (E > 2 > 1) en la pantalla LED,
5 segundos).
pulse el botón Color, y comience otra vez a partir de
Si aparece otro error, consulte el manual impreso: Solución de problemas
de configuración de red.
A
B
.
3
C
Make sure that 1
appears in the LED.
Go to page 44.
Asegúrese de que
aparece 1 en la
pantalla LED.
Vaya a la página
44.
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4499b026Pixma mp499

Table of Contents