Table of Contents
Advertisement
CAUTION:
If you are inserting or removing a drive, shut down the operating system properly, turn off the computer,
and unplug the power cord. Do not remove a drive while the computer is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid
touching the connector.
Handle a drive carefully; do not drop it.
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields
such as monitors or speakers.
If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and label
the package "Fragile: Handle With Care."
System Board Drive Connections
Refer to the following illustration and table to identify the system board drive connectors.
Table 6-2
System Board Drive Connections
No.
System Board Connector
1
Media Card Reader
2
SATA0
3
SATA1
4
SATA2
44
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
To prevent loss of work and damage to the computer or drive:
System Board Label
F_USB2
SATA0
SATA1
SATA2
Color
black
dark blue
white
light blue
Advertisement
Table of Contents
