Terminating The Programme; Changing The Programme; Intensive Drying; Maintenance And Care - Bosch SMV50C00GB Operating Instructions Manual

Dishwasher 60cm , activewater black fully integrated
Hide thumbs Also See for SMV50C00GB:
Table of Contents

Advertisement

en

Terminating the programme

T e r m i n a t i n g t h e p r o g r am m e
(Reset)
– Open the door.
– Press START button h for approx.
3 sec.
The Cleaning display X goes out.
– Close the door.
The remaining programme sequence
lasts approx. 1 minute more. (Buzzer
sounds.)
– Open the door.
– Switch off ON/OFF switch (.
– Close the door.

Changing the programme

When the START button h has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme (Reset).

Intensive drying

The final rinse uses a higher temperature
which improves the drying result. The
running time may increase slightly.
(Caution if utensils are delicate!)
– Open the door.
– Switch on ON/OFF switch (.
– Hold down button > P and press
START button h until the End display
` and salt refill indicator )* flash.
– Release buttons.
– Keep pressing button > P until the
salt refill indicator )* and “Check
water supply” )2 flash.
– Release buttons.
The displays )* and )2 flash.
To change the setting,
– Press button < H until the display
# is lit (Intensive drying on).
– Press START button h.
The displays go out. The setting is
saved.
– Close the door.

Maintenance and care

A regular inspection and maintenance of
your machine will help to prevent faults.
This saves time and prevents problems.

Overall condition of the machine

– Check spray arm for grease and
limescale deposits.
If you find such deposits:
– Fill detergent dispenser with detergent.
Start the appliance without utensils in
the programme with the highest rinsing
temperature.
Clean the appliance with detergents/
appliance cleaners which are particularly
suitable for use with dishwashers.
– Regularly clean door seal with a damp
cloth.
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not liable
for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water and a
little washing up liquid are adequate. Do
not use sponges with a rough surface or
abrasive detergents, as these could
scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths or
wash them out thoroughly several times
before using for the first time.
ã=
Warning
Never use other chlorinated household
detergents! Health hazard!

Special salt and rinse aid

– Check the refill indicators )* and
)". If required, refill salt and/or rinse
aid.
Page 18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents