Table of Contents
Advertisement
Technical data
Dimensions (DxWxH)
Weight
Max. capacity
Condensation container
Connection voltage
Connected load
Fuse protection
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
Cottons 8 kg
Cupboard Dry*
Iron Dry*
Easy-Care 3.5 kg
Cupboard Dry*
*Test program according to DIN EN 61121.
**The values may differ from the those specified depending on the type of fabric, mixture of
laundry to be dried, residual moisture in the fabric and loading capacity.
Drum interior light
(depending on model)
The drum is illuminated after the door is opened or closed, and also after the programme is
started. It goes out automatically. Replacing the bulb
Optional accessories
Connection fittings for condensation outlet
WTZ
The condensation is conveyed directly via a hose.
1110
Washer-dryer stack connection set
WTZ
11310
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. This connection set must always be used to secure the dryer to the washing
machine. With pull-out worktop: WTZ 11300.
Installation underneath the worktop
WTZ
10290
Risk of electric shock!
Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
60 x 60 x 85 cm (height adjustable)
approximately 45 kg
8 kg
4.2 l
see appliance rating plate
These are guide values determined under standard
conditions. Fluctuations up to 10% are possible.
Spin speed in rpm
Drying time
(residual moisture)
in min.**
13 A
1400 (approx. 50 %)
105
1000 (approx. 60 %)
122
800
(approx. 70 %)
139
1400 (approx. 50 %)
83
1000 (approx. 60 %)
100
800
(approx. 70 %)
117
1000
39
800
(approx. 40 %)
42
600
(approx. 50 %)
51
(bulb E14, 25 W)
Page 10.
(order from the after-sales service using the order number)
What to do if ...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed after-sales service directory, or by calling one of these numbers:
– GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
– IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
The
Start/Stop indicator
lamp does not light up.
The Container and
Stop indicator lights are
flashing.
The Filter and
Energy
indicator lights are flashing.
consumption
in kWh**
Dryer does not start.
13 A
3.74
4.49
Water is running out.
5.17
2.24
The door opens by itself.
3.44
The required degree of
3.86
dryness was not achieved or
the drying time was too long.
1.05
1.35
1.65
Laundry damp.
The moisture content of the room
has increased significantly.
Mains failure.
One or more indicator lights for
programme status are
flashing.
The interior light is not working
(depending on model).
9
Mains plug plugged in?
Programme selected?
Start/
Empty the condensation container.
If featured, check hose for condensation outlet.
Start/Stop
Clean the fluff filter and/or air cooler
Start/Stop button selected?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
Align dryer horizontally.
Clean air cooler seal.
Push the door closed until you hear it engage.
Clean the fluff filter and/or air cooler
Empty condensation container
Check water outlet (if featured).
Ambient temperature higher than 35 °C
Air inlet may be blocked
Was an unsuitable programme selected?
Has the dryer been installed with sufficient space on all
sides? Ensure that air can circulate.
Fine layer of scale on the moisture sensors
moisture sensors
page 6.
Use the next drying programme up or use the timer
programme as a supplement
Warm laundry feels damper than it really is!
Make sure the room is sufficiently ventilated.
Air inlet blocked?
keep unobstructed.
Ensure that the air cooler has been inserted.
Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
Clean filter and air cooler
Check installation conditions
Switch off, leave to cool down, switch on again, restart
programme.
Pull out the appliance plug, remove the cover cap in the
interior above the door (use Torx 20 screw driver) and
replace the bulb. Close the cover cap.
Never operate the dryer without a cover cap.
Page 4/6.
Page 4/6.
Page 4.
airing.
keep unobstructed.
Page 7.
Clean the
Page 7.
Page 4/6.
Page 8.
10
Advertisement
Table of Contents
