Display Assembly On Computers With 17.3-In Displays - HP ProBook 4520s Maintenance And Service Manual

Display assembly on computers with 17.3-in displays

NOTE: The Miscellaneous LCD Cable Kit, spare part number 599806-001, includes 2 WLAN
antenna transceivers and cables.
Description
For use only with computers with 17.3-in displays
●
17.3-in HD BrightView display assembly for use in computers equipped with webcam and
WWAN (1600×900 resolution)
●
17.3-in HD BrightView display assembly (1600×900 resolution)
●
17.3-in HD AntiGlare display assembly for use in computers equipped with webcam and
WWAN (1600×900 resolution)
●
17.3-in HD BrightView display assembly (1600×900 resolution)
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover and keyboard (see
6. Disconnect the power button cable from the system board (see
7. Remove the speakers (see
Remove the display cables:
1. Position the computer right-side up with the front toward you.
2. Open the computer as far as possible.
3. Disconnect the webcam (1) and display panel cable (2) from the system board and from the
routing channels.
4. Disconnect the microphone cable (3) from the system board and from the routing channels.
80 Chapter 4 Removal and replacement procedures
Battery on page 50).
Switch cover and keyboard on page
Speakers on page 60).
Spare part number
598708-001
606167-001
606166-001
606165-001
51).
Power button board on page 58).