Installing And Setting Up Omnibook Hardware Diagnostics; Downloading The Latest Version From The Web - HP OmniBook 2000 User Manual

Hardware diagnostics

Hide thumbs Also See for OmniBook 2000:

Table of Contents

Starting OmniBook Hardware Diagnostics

Installing and Setting Up OmniBook

Hardware Diagnostics

For OmniBook users, as well as network administrators, you must create an

OmniBook Hardware Diagnostics floppy diskette before you can use OmniBook

Hardware Diagnostics. Use one of the following methods:

For any compatible OmniBook PC, you can create the OmniBook Hardware

Diagnostics floppy diskette from a file downloaded from the World Wide Web.

For OmniBook 3000 and OmniBook Sojourn PCs, you can create the

OmniBook Hardware Diagnostics floppy diskette from TopTools, from the hard

disk, or from the Recovery CD.

OmniBook Hardware Diagnostics must not be run directly from your operating

system. OmniBook Hardware Diagnostics will function correctly only under the DOS

operating system and once the correct drivers have been loaded.

You can download the latest version of the OmniBook Hardware Diagnostics utility

from the OmniBook web site in the Support, Software area:

http://www.hp.com/omnibook

For more information about the HP OmniBook website and for information about

HP Electronic Information Services, refer to page 6-3.

There are two files available for downloading:

The OmniBook Hardware Diagnostics utility. A compressed file (with the

extension .EXE) which contains all the files necessary for running OmniBook

Hardware Diagnostics.

The User's Guide for OmniBook Hardware Diagnostics – the document you are

reading. It is a PDF file which can be viewed and printed using Adobe's Acrobat

Reader. (The Adobe Acrobat Reader can be downloaded free of charge from

HP's World Wide Web site.)

After you have downloaded the diagnostics file, follow the instructions included

with the file:

1-2

Table of Contents