Using The Pointing Device; To Use The Pointing Device; To Clean The Pointing Device - HP OmniBook 2000 User Manual

Hp omnibook 2000: users guide
Hide thumbs Also See for OmniBook 2000:
Table of Contents

Advertisement

Using the Pointing Device

The TrackPoint III pointing device is located in the center of the keyboard, and the
two click buttons are located below the keyboard.
The pointing device controls the motion of the cursor on the screen by detecting
pressure. The pointing device itself does not move. The cursor speed corresponds to
the amount of pressure. The click buttons work like those on a standard mouse.
What the buttons do depends on the software that is used.
In this section you'll learn how to
Use the pointing device.
Clean the pointing device cap.

To use the pointing device

1. Place your hands in the typing position.
2. With your index finger, press the pointing device in the direction you want the
pointer to move.
3. Pressing the pointing device away from you moves the pointer up the screen
and pressing it toward you moves the pointer down the screen.
4. Click the buttons with your thumb to select and drag.
You can customize the operation of the pointing device using Windows Control
Panel Mouse.
Hint
Drifting pointer. If you ever notice the pointer slowly "drifting" on the screen, don't
touch the pointing device for at least 3 seconds. It automatically stops moving.

To clean the pointing device

The cap on the end of the pointing device is removable.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnibook 5700

Table of Contents