Connecting A 1394 Device; Stopping A 1394 Device - HP Compaq Presario,Presario V6000 User Manual

Connecting a 1394 device

CAUTION
device.
To connect a 1394 device to the computer, connect the 1394 cable for the device to the 1394 port. You
will hear a sound when the device has been detected.
NOTE
displayed in the notification area, at the far right of the taskbar.

Stopping a 1394 device

CAUTION
before removing it.
CAUTION
1394 device.
1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the
taskbar.
NOTE
(< or <<) in the notification area.
2. Click the name of the device in the list.
3. Click Stop.
4 Chapter 2 Using a 1394 device (select models only)
To prevent damage to a 1394 port connector, use minimal force to connect a 1394
The first time you connect a 1394 device, the "Found New Hardware" message is
To prevent loss of information or an unresponsive system, stop the 1394 device
To prevent damage to a 1394 connector, do not pull on the cable to disconnect the
To display the Safely Remove Hardware icon, click the Show Hidden Icons icon
ENWW