Quick Troubleshooting; The Computer Is Unable To Start Up - HP Compaq NC6400 Getting Started

Troubleshooting

Quick troubleshooting

The computer is unable to start up

To turn on the computer, press the power button. When the
computer is turned on, the power light is turned on.
If the computer and the power light are not turned on when you
press the power button, adequate power may not be available to
the computer.
The suggestions below may help you determine why the
computer will not start up:
If the computer is plugged into an AC outlet, verify that the
■
AC outlet is providing adequate power by plugging another
electrical device into the outlet.
If the power light on the front of the computer is blinking
■
rapidly, replace the AC adapter with one having a higher
power rating, and then plug the adapter into an AC outlet.
✎
If the computer is running on battery power or is plugged into
■
an external power source other than an AC outlet, plug the
computer into an AC outlet using the AC adapter. Be sure the
power cord and AC adapter connections are secure.
If the computer is running on battery power:
■
Remove the primary battery and optional accessory
❏
battery (if applicable) and plug the computer into an AC
outlet using the AC adapter. If you can turn the computer
on, one of the batteries may need to be replaced.
If the battery light on the front of the computer is blinking,
❏
the battery has reached a low-battery condition, which
may not allow the computer to start up. Plug the computer
to an AC outlet using the AC adapter to start the computer
and allow the battery to charge.
3–2
Use only the included AC adapter or one approved for this
computer.
Getting Started