Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Grizzly G9247
Summary of Contents for Grizzly G9247
- Page 1 INSTRUCTION MANUAL COPYRIGHT ©2000 BY GRIZZLY INDUSTRIAL, INC. 1821 VALENCIA ST., BELLINGHAM, WA 98227 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. MARCH, 2000 PRINTED IN CHINA...
- Page 2 G9247 Mini Wood Lathe...
-
Page 3: General Safety Rules
Keep work area well lighted. G9247 Mini Wood Lathe Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. - Page 4 A guard or other part that is damaged should be properly repaired or replaced. 19. NEVER LEAVE TOOL RUNNING UNAT- TENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop. G9247 Mini Wood Lathe...
-
Page 5: Additional Safety Instructions For Lathes
Additional Safety Instructions For Lathes 1. MAKE SURE ALL GUARDS are in place and that the Lathe sits on a flat, stable sur- face. 2. ALWAYS WEAR EYE PROTECTION or a face shield when operating the Lathe. Use a respirator to avoid inhaling dust. All safe- ty equipment should be ANSI approved. - Page 6 To operate this, or any power tool, safely and efficiently, it is essential to become as familiar with its characteristics as possible. The time you invest before you begin to use your Model G9247 will be time well spent. DO NOT operate this machine until you are completely familiar with the contents of this manual.
-
Page 7: Control Panel Operation
The Control Panel consists of ON/OFF buttons, fuse access, and a Variable Speed Knob (#20). To turn the lathe on, push up on the Red button. To turn the lathe off, Press down the Red button. The Variable Speed Knob can be adjusted from 0 to 4500 RPM. To access the fuse, use a Phillips head screwdriver to remove the fuse cover. -
Page 8: Faceplate Turning
Position the Tool Rest so that you can shape the outside of the workpiece as desired. Once outside work has been completed, the Tool Rest can be moved and adjusted (make certain the lathe is OFF and unplugged), so that it is opposite the face of the workpiece. From this position, the inside of the workpiece can be hollowed out. - Page 9 G9247 Mini Wood Lathe...
- Page 10 G9247 Mini Wood Lathe...
- Page 11 G9247 Mini Wood Lathe...
-
Page 12: Warranty And Returns
WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. -
Page 13: Warranty Card
Do you think your purchase represents good value? ___Yes Would you recommend Grizzly Imports to a friend? ___Yes Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than three times. ___Yes Comments:_________________________________________________... - Page 14 FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: Name_______________________________ Street_______________________________ City______________State______Zip______ GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Place Stamp Here...