Other Information - Chevrolet 2009 Suburban Owner's Manual

Sending a Stored Name Tag During a Call
b g
1. Press . The system responds with "Ready"
followed by a tone.
2. Say "Send name tag." The system responds with
"Say a name tag to send tones" followed by a tone.
3. Say the name tag to send.
•
If the system clearly recognizes the name tag it
responds with "OK, Sending <name tag>" and
the dial tones are sent and the call continues.
•
If the system is not sure it recognized the name
tag properly, it responds "Dial <name tag>,
Please say yes or no?" followed by a tone. If the
name tag is correct, say "Yes". The system
responds with "OK, Sending <name tag>" and
the dial tones are sent and the call continues.
Clearing the System
Unless information is deleted out of the in-vehicle
Bluetooth system, it will be retained indefinitely. This
includes all saved name tags in the phonebook
and phone pairing information. For information on how
to delete this information, see the above sections
on Deleting a Paired Phone and Deleting Name Tags.
3-126

Other Information

®
The Bluetooth word mark and logos are owned by the
®
Bluetooth SIG, Inc. and any use of such marks by
General Motors is under license. Other trademarks and
trade names are those of their respective owners.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation of the device.
Changes or modifications to this system by other than
an authorized service facility could void authorization to
use this equipment.