Chevrolet 2009 Suburban Owner's Manual page 307

Using the Store Command
The store command allows a phone number to be
stored without entering the digits individually.
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Store". The system responds with "Store,
number please" followed by a tone.
3. Say the complete phone number to be stored at
once with no pauses.
•
If the system recognizes the number it responds
with "OK, Storing" and repeats the phone number.
•
If the system is unsure it recognizes the phone
number, it responds with "Store" and repeats the
number followed by "Please say yes or no". If the
number is correct, say "Yes". If the number is not
correct, say "No". The system will ask for the
number to be re-entered.
4. After the system stores the phone number, it
responds with "Please say the name tag" followed
by a tone.
for two seconds. The system
5. Say a name tag for the phone number. The name
tag is recorded and the system responds with
"About to store <name tag>. Does that sound OK?".
•
If the name tag does not sound correct, say
"No" and repeat Step 5.
•
If the name tag sounds correct, say "Yes" and
the name tag is stored. After the number is
stored the system returns to the main menu.
Using the Digit Store Command
The digit store command allows a phone number to be
stored by entering the digits individually.
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Digit Store". The system responds with "Please
say the first digit to store" followed by a tone.
3. Say the first digit to be stored. The system will
repeat back the digit it heard followed by a tone.
Continue entering digits until the number to be
stored is complete.
•
If an unwanted number is recognized by the
system, say "Clear" at any time to clear the
last number.
•
To hear all of the numbers recognized by the
system, say "Verify" at any time and the
system will repeat them.
for two seconds. The system
3-119