Greenlee SVC-10 Instruction Manual page 14

Specifications and Accuracy (cont'd)
Two-Probe, Three-Phase Sequence Test: 100 V to 700 V
Frequency Range: 50 to 60 Hz
Indication: Tone and
Continuity Test: 0 to 200 k
Test Current: 5 A (approximate)
Indication: Tone and
Resistance Range: 0 to 1999
Resolution: 1
Accuracy: (3% of reading + 3
SVC-10 and SVC-20
Diode Test:
Open Circuit Voltage: 1.75 V (approximate)
Test Current: 10 A (approximate)
Note: L1 is positive when checking diodes and continuity.
Operating/Storage Conditions: –10 C to 55 C (14 F to 131 F)
0% to 85% relative humidity
Remove battery before storing.
Battery: 9-Volt battery (NEDA 1604, JIS 006P or IEC 6LF22)
Overvoltage Protection: Category III, 700 VAC and 700 VDC
Pollution Degree: 2
Altitude: 2000 m (6500') maximum
14
or on LCD
on LCD
)