GoVideo DP7040 Quick Reference Manual

DPT100 TV TUNER
About the DPT100
The DPT100 converts your DP7040 or DP8440 DVD
player into a portable television. The tuner connects
to the side of the DVD player and is powered by the
player, so no additional power source is required. Use
the supplied antenna to receive local TV broadcasts
while you're on the go. Or for improved reception, use
the RF adapter to connect to your home's cable TV
source or a rooftop antenna.
1
1 1
Antenna
2 2
Tuner
3
RF Adapter
Antenna
Input Jack
Connects to
the Antenna or
RF Adapter
Quick Reference
Basic Setup & Operations
2
3
Video Output connector:
Connects to the DVD Player
Tuner Support Pin:
Connects to the DVD Player
Connecting the Tuner
Connect the TV tuner to the DVD player as follows:
1
Align the tuner with the edge of the DVD player
and insert the tuner's connector into the DVD
player's TV Tuner Input jack.
• The tuner support pin must be inserted at
the same time as the jack to make a secure
connection.
Using the Antenna
Connect the antenna to the TV tuner as follows:
1
Connect the TV tuner to the player as described
above.
2
Connect the antenna to
the EXT. ANT port on the
tuner. Align the square
base of the antenna
jack with the sides of the
input.
3
You are now ready to
search for channels.
Using the RF Adapter
Connect the RF adapter to the TV tuner as follows:
1
Connect the TV tuner to the player as described
above.
2
Connect the RF adapter to the EXT. ANT port on
the tuner.
3
Connect the RF cable from your cable TV wall
outlet, cable box, antenna, or other RF source to
the RF adapter.
4
You are now ready to search for channels.