Audio Connectors - Gigabyte GA-7VT600 User Manual

USB/LAN* Connector
LAN *
USB 0
USB 1

Audio Connectors

Line In (Rear Speaker)
Line Out (Front Speaker)
MIC In (Center and Subwoofer)
If you want the detail information for 2-/4-/6-channel audio setup
installation, please refer to page 74.
" * " For GA-7VT600-L only.
LAN is fast Ethernet with 10/100Mbps speed.
Before you connect your device(s) into USB
connector(s), please make sure your device(s) such
as USB keyboard,mouse, scanner, zip, speaker...
etc. Have a standard USB interface.Also make
sure your OS supports USB controller. If your OS
does not support USB controller, please contact
OS vendor for possible patch or driver upgrade. For
more information please contact your OS or device
(s) vendors.
After install onboard audio driver, you may con-
nect speaker to Line Out jack, microphone to MIC
In jack. Device like CD-ROM,walkman etc. can
be connected to Line-In jack.
Please note:
You are able to use 2-/4-/6-channel audio feature
by S/W selection.
If you want to enable 6-channel function, you
have 2 choose for hardware connection.
Method1:
Connect "Front Speaker" to "Line Out"
Connect "Rear Speaker" to "Line In"
Connect "Center and Subwoofer" to "MIC Out ".
Method2:
You can refer to page 26, and contact your
nearest dealer for optional SUR_CEN cable.
- 19 - Hardware Installation Process