Download Print this page
Tube Works 303 Smooth Pure Tube User Manual

Tube Works 303 Smooth Pure Tube User Manual

Tube pre-amp pedal

Advertisement

Quick Links

WARRANTY AND OWNER REGISTRATION
Your Smooth pick pedal is warranted for a period of THREE FULL
YEARS against defects to the original, registered owner provided he/
she has returned a completely filled-out OWNER'S REGISTRATION
CARD. This warranty covers parts and labor only; shipping charges re-
main the sole responsibility of the owner. Damage due to modification
or abuse is excluded from this warranty. Before returning any unit for
service, a RETURNED MERCNANDISE AUTHORIZATION NUMBER
(RMA) must be obtained. Manufacturer is not responsible for conse-
quential or inconsequential damages resulting from any application or
use of this product. Manufacturer and sales agents assume no liability
or responsibility for safety or injury relating to the use of the Smooth
pick pedal, and user agrees to hold manufacturer and designer harm-
less in this regard. This is the full extent of the warranty; no other war-
ranties implied or intended.
7811 E. Pierce St. § Scottsdale, AZ 85257
Ph: 480-941-0705 Fax: 480-946-2412
www.genzbenz.com
MODEL 303
Thank you for your purchase of the Smooth tube pre-amp
pedal. For the applications intended, it will give you a quality of sound
unattainable until now. Your Smooth pick pedal is intended primarily for
bass, keyboard and guitar players who desire to warm-up and enhance
their sound by using the classic vacuum tube as the vehicle. The heart
of the Smooth is the classic 12AX7A twin triode vacuum tube. It is pos-
sible to obtain many classic "old amp" sounds with your present solid-
state and probably over-processed equipment. If you are using tube
equipment, the Smooth win add even more to the good sound you al-
ready have!

Advertisement

loading

Summary of Contents for Tube Works 303 Smooth Pure Tube

  • Page 1 The heart of the Smooth is the classic 12AX7A twin triode vacuum tube. It is pos- sible to obtain many classic “old amp” sounds with your present solid- state and probably over-processed equipment. If you are using tube...
  • Page 2 VOLTAGE REQUIREMENT : 120 VAC, 9 WATTS TUBE TYPE :12AX7/ECC83-SELECTED INPUT IMPEDANCE :1 MEG. OHMS SIN RATIO :70 dB (Typical) HUM & NOISE :-85 dB (Typical) OUTPUT HAPEDANCE :10K OHMS OUTPUT LEVEL :0 dBV (.78 V Typical) WEIGHT :3 lbs. shipping...

This manual is also suitable for:

Ht-boost