Altec Lansing JACKET H2O III Quick Start Manual

1. Ma ke sure the following items are
included in your package.
AC Adapter
4. Pairing Your Speaker with a Bluetooth Device
-Pairing The Jacket H2O III Speaker with a Bluetooth Device for the First Time
When you power on your Jacket H2O III speaker for the first
time, it will automatically go into pairing mode. The LED status
light will flash rapidly as your speaker searches
for a Bluetooth audio source to pair with.
Once you have successfully paired your speaker with a
Bluetooth audio source, the LED status light will stop flashing
rapidly, and begin shining steadily while remaining blue. In
addition, your speaker will emit an audible tone to confirm that
pairing was successful.
6.Using the Stereo Plus Pairing Feature
The Stereo Plus Pairing feature allows you to connect two Jacket H2O III speakers together
for a bigger, more powerful sound.
To use the Stereo Plus Pairing feature follow the steps below:
1. Have one Jacket H2O III speaker turned on, paired and playing music.
2. Power on your second Jacket H2O III speaker.
3. Press and hold the + and - buttons on both speakers at the same time for two seconds.
The two connected speakers will now play the same music from the same device.
2. For a look at the various buttons on your speaker, view the graphic below.
USB Cable
Power On ...........................................
Power O ............................................Hold
Play / Pause........................................Press
Volume Up / Down..............................Press + or -
Pairing Mode / Disconnect Device....Press
Answer / End Call............................... Press
Stereo Plus Pairing............................Hold + and -
Next Track..........................................Hold +
Previous Track....................................Hold -
AUX Cable
-Pairing Additional Bluetooth Devices to The Jacket H2O III Speaker
By pressing the " and - " buttons simultaneously, your speaker will again go
into pairing mode. The LED status light will flash rapidly, as your speaker searches
for another Bluetooth audio source to pair with.
+and -
Quick Start Guide
3. Connect the included USB Cable to the included AC Adapter in order to
charge your speaker's internal battery. A full charge takes approximately 4 hours.
Charging: When charging, an orange LED light will illuminate. The orange light will
turn o when your unit is fully charged.
Hold for 2 Seconds
for 2 Seconds
and -
5. Power on your speaker. Go to the Bluetooth Manager of your Bluetooth device.
Search Bluetooth devices and select "The Jacket H2O 3" to start connecting.
7.You can also use the included 3.5mm Auxiliary Cable to
connect audio devices through the AUX In port on your speaker.
+and-
Indicator