Remote Control Operation; Operation Mode - LG MV18AH Owner's Manual

Operating Instructions

Remote Control Operation

The Remote Controller transmits the signals to the system.
5
6
4
2
7
ON
11
8
13
14

Operation Mode

Cooling Operation
Auto Operation
Healthy Dehumidification Operation
Heating Operation
• Cooling Model( ), Heat Pump Model(
10 Multi Type Air Conditioner
Signal transmitter
1
3
10
CANCEL
9
SET
OFF
AUTO CLEAN
12
15
Flip-up door
(opened)
1
START/STOP BUTTON
Operation starts when this button is pressed
and stops when the button is pressed again.
OPERATION MODE SELECTION BUTTON
2
Used to select the operation mode.
ROOM TEMPERATURE
3
SETTING BUTTONS
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR
4
Used to select fan speed in four steps
low, medium, high and CHAOS.
JET COOL
5
Used to start or stop the speed cooling/heating.
(Speed cooling/heating operates super high fan
speed.)
CHAOS SWING BUTTON
6
Used to stop or start louver movement and set
the desired up/down airflow direction.
ON/OFF TIMER BUTTONS
7
Used to set the time of starting and stopping
operation.
TIME SETTING BUTTONS
8
Used to adjust the time.
TIMER SET/CANCEL BUTTON
9
Used to set the timer when the desired time is
obtained and to cancel the Timer operation.
10
SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
AIR CIRCULATION BUTTON
11
Used to circulate the room air without cooling or
heating.
ROOM TEMPERATURE CHECKING BUTTON
12
Used to check the room temperature.
PLASMA(OPTIONAL)
13
Used to start or stop the plasma-purification
function.
RESET BUTTON
14
Initialize remote controller.
15 2nd F Button
Used prior to using modes printed in blue at the
bottom of buttons.
)
(Cooling Only)
(Heat Pump)