To Display The Dvd Menu; To Display The Dvd Title; 1.5 Times Speed Playback; Screen Saver - LG HT806SH Owner's Manual

28 Operating

To display the DVD Menu

r
When you play a DVD which contains several menu,
you can select the menu you want using the Menu.
1. Press DISC MENU.
The disc's menu appears.
2. Select the menu by using WSAD.
3. Press d PLAY, MONO/STEREO to confirm.

To display the DVD title

r
When you play a DVD which contains several title,
you can select the title you want using the Menu.
1. Press TITLE.
The disc's title appears.
2. Select the menu by pressing WSAD.
3. Press d PLAY, MONO/STEREO to confirm.
4

1.5 times speed playback

r
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
1. During playback, press d PLAY, MONO/
STEREO to play at 1.5 times speed. "dX1.5"
appears on the screen.
2. Press d PLAY, MONO/STEREO again to exit.

Screen Saver

The screen saver appears when you leave the unit
in Stop mode for about five minutes.
HT806SH-D0_BGBRLL_ENG_4757.indd 28
Starting play from selected
time
ry
To start playing at any chosen time on the file or
title.
1. Press m INFO/DISPLAY during playback.
2. Press WS to select the time clock icon and
"--:--:--" appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter "11020" by using
numerical buttons.
4. Press b ENTER to confirm. Playback starts from
the selected time.

Resume playback

ryut
The unit records the point where you pressed the
Z STOP depending on the disc.
If "MZ (Resume Stop)" appears on the screen briefly,
press d PLAY, MONO/STEREO to resume playback
(from the scene point).
If you press Z STOP twice or unload the disc,
"Z"(Complete Stop) appears on the screen. The
unit will clear the stopped point.
, ,
Note
The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B OPEN/CLOSE, etc).

Changing subtitle code page

y
If the subtitle is not displayed properly, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press m INFO/DISPLAY to
display the On-Screen display.
2. Use WS to select the [Code Page] option.
3. Use AD to select desired code option.
4. Press x RETURN to exit the On-Screen display.
2011-07-01 4:21:56