Connect The Lan Cable; Selecting Method For Connecting To Computer; Network Connection And Configuration - Canon imageCLASS MF4450 Starter Manual

1 2
Preface Installing the Machine
Selecting a Method for Connecting the
Machine to a Computer
There are two ways to connect the machine to a computer: Network connection and USB connection. Select the connection
type according to your environment or functions to be used.
* Functions with USB connection and network connection can be used simultaneously.
* To use the scanning function with Macintosh, you need to connect with a USB cable.
• For Network Connection (MF4570dn Only)

Network Connection and Configuration

The procedures for connecting to and configuring a network are the
same for Windows and Macintosh.
Connect to and configure a network using the following procedure.
* Installation methods for the software are different. After connection and
configuration, see the relevant pages for the respective procedures for
installation.
Network Connection and Configuration
1.

Connect the LAN cable.

2.
The machine sets the
IP address automatically.
Wait approximately
2 minutes.
If you want to set the IP address manually,
see the following.
e-Manual "Setting IPv4 Address"
e-Manual "Setting IPv6 Address"
For Windows
•
Installing via Network Connection P. 18
3
Configuring and Connecting the Fax
About obtaining the IP address automatically (AutoIP)
<DHCP> or <Auto IP> is enabled in the default setting.
Even if you do not set the IP address manually, this machine can obtain it automatically.
•
Even if you do not have a dedicated device such as a DHCP server, the IP address is
obtained automatically.
•
The <DHCP> setting is prioritized over <Auto IP>.
If a fixed IP address is set as the IP address of the computer, set the fixed IP address also
for this machine manually.
If the IP address of the machine is changed
When the machine and computer are on the same subnet, the connection is
maintained.
Installing via Network Connection
4
Connecting to a Computer and
Installing the Drivers
• For USB Connection
For Windows
•
Installing with USB Connection P. 20
For Macintosh
•
Installing the Software P. 23
About the LAN cable
•
The machine does not come with a LAN cable or a hub.
Have cables or a hub ready as needed.
•
Use a Category 5 or higher twisted pair cable for the LAN.
For Macintosh
•
Installing the Software P. 23
Appendix
17